NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
R9000 AD7200 x10 Firmware Ver 1.0.5.24 kills WiFi
It seems frustrating upgrading firmware on the Netgear x10 R9000 . I recently upgraded to current version 1.0.5.24 and all the Wifi (2.4, 5, 60) cannot be enabled, all come in off state after power on...
Did you erase the nvram using the following commands via serial connection?
nvram erase
go
I tried the commands on my R9000. Wifi still dead. Is Kamoj add-on mandatory for this procedure?
Resetting nvram has nothing to do with loading any add-on.
You need to verify if you indeed have a hardware issue.
My router wifi worked with the dd-wrt FW but not with NG's after firmware upgrade. You may want to try dd-wrt or openwrt FW to verifiy your hardware first. They use different nvram structure.
Good luck.