AC2100 firmware failure

---

BobsAC2100 wrote:

My AC2100 firmware update failed.  Now the power light is solid orange.  When I depress and hold the reset button, the power light blinks white. 

---

The blinking LED tells us that you have corrupt firmware on your R7200.

There is more severe, recovery reset, that you could try:

• Press reset for 30 seconds
• Keep pressing reset while removing power
• Keep pressing reset for another 30 seconds while apply power

If that fails, you are into TFTP country.

How to upload firmware to a NETGEAR router using Windows TFTP | Answer | NETGEAR Support

This isn't the easiest operation, so if you are forced to use it, you could try a web search to find videos that guide you through the process.