NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
R7000 ethernet devices missing
Not sure when this started happening but when I go into the web GUI of the R7000 and attached devices all my wireless clients are displayed. But, my ethernet devices are not - the router status light...
sorry, didn't know if you did or not.
the version thats been the most stable is pretty old. The one we always used to recommend was 1.0.9.42
The .126 version was also fairly stable for those devices it worked well on.
It seems like there's a small percentage of the r7000's that struggle with firmware
Obviously I want to avoid going too far back for security concerns.
What would be your advice here? Which version?
so they don't show up in the attached devices list. Do they show in the access control list (doesn't have to be enabled).
If they do, I'd just leave it as is.
If they don't, then I'd try downgrading
What browser are you using?
I've got v.134 loaded on my R7000 and all my devices appear, wired and wireless when I had it online for a week or so:
I use MS Edge here.
Please take a screen capture of what your seeing and post it.
It is connected as I am using it, but the GUI doesn't show its connected.
It is using the IP address 192.168.x.11 and a smart switch I have is on 2.4g wifi and using 192.168.x.11
How do I change this? And could this be the cause?
