NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

ericseaberg's avatar
ericseaberg
Tutor
Apr 27, 2020
Solved

Slow throughput from Gigabit ISP

I purchased my Nighthawk R9000 from FlashRouters with DD-WRT firmware installed and have had nothing but issues with its implementaion.  I've been back-n-forth many times with the people there, and h...
Firmware
Troubleshooting
  • labatt's avatar
    labatt
    May 05, 2020

    Glad you have a working r9000. I ran DD-WRT on various routers starting with a Linksys WRT54G back in 2006. Was a solid firmware for the most part and lots more knobs to twist. 

plemans's avatar
plemans
Guru - Experienced User
Apr 27, 2020

did you try the stock firmware?

Or Voxel's 3rd party firmware? 

ericseaberg's avatar
ericseaberg
Tutor
Apr 27, 2020

Thanks for the reply... and, NO, I haven't tried the stock firmware.  I purchased the Nighthawk from FlashRouters presetup with DD-WRT and my ExpressVPN credentials.

 

I really just want to know if anyone else has had throughput issues with the stock firmware.

 

What is the advantage with Voxel over DD-WRT?

 

 

  • plemans's avatar
    plemans
    Guru - Experienced User
    Apr 27, 2020

    1. the firmware you've got is made by a company to work with its vpn setup. Their main goal is to sell vpn service and their setup, not support/update firmwares.  Plus it always leaves them an "out" like "its netgear's hardware, its their fault" or "its because of how dd-wrt works".  Their main goal isn't how well the router runs. 

    2. voxel's firmware has been pretty solid and well reviewed for 3rd party firmwares. its free and has been pretty popular for netgear devices. 

    3. The stock firmware does support gigabit. I don't have a R9000 so I can't personally attest to it hitting gigabit but I've helped others get to gigabit. the main recommendations I have are to avoid access control, qos, traffic monitoring if you're having issues.  

     

    • labatt's avatar
      labatt
      Mentor
      Apr 27, 2020

      I don't think that DD-WRT supports CTF in all their firmware. That might explain the slow speed. Should you decide to install Netgear firmware, be careful with how you do it. Normally DD-WRT has a back to OEM file for the initial Netgear install. Just trying to install Netgear OEM firmware over DD-WRT does not normally work in my experience. 

      • ericseaberg's avatar
        ericseaberg
        Tutor
        Apr 27, 2020

        Thanks for the replies, guys.  I had been in contact with FlashRouters and they sent me a link to get this:

         

        http://www.downloads.netgear.com/files/GDC/R9000/R9000-V1.0.5.8.zip

         

         

        Look correct?  Sounds like that the way I'm going to have to go, which is fine by me.  I was having so many issues with ExpressVPN disconnecting a lot and things losing connections all over the house.

         

        I may also take a quick look at Voxel's firmware that plemans suggested.