NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Suddenly my printer, iphones and smart TV's Won't Connectg
I've had my Model R7000 router since 2013 with no WiFi problems connecting multiple devices. Suddenly today, my Printer, iPhones and Smart TV's won't connect to my router. I've rebooted all devices...
Give this a try:
You have managed to manually turn off the Wi-Fi radios. Neither firmware updates or reset to firmware default settings or cycling the power will change the state of the on/off switch. Once turned off, it stays off until manually turned back on.
When looking from the front of the router, the last two leds on the far right are a combination indicator/switch. The second one in is the Wi-Fi radio on/off switch. Press and hold for two seconds then release. Your Wi-Fi radios should come back on.
Hiker_Bob In order for anyone to really give you any sort of advice, you really need to tell your audience what model number you have rather than just 'R7000'.
What firmware is running on your router? When did you last update the firmware?
Has anything obvious changed in your setup since everything stopped performing as it used to?
What's your set up? Who's your ISP? Are you on ADSL running through a modem or full fibre through an Optical Network Terminal?
Have you consulted your router manual and read it?
OK, I'm using a Nighthawk AC1900 Smart WiFi Router - Model R7000 since July of 2013. My firmware version is V1.0.11.106_102.100
As I said before, I've had no problems since purchasing and setting up this router until today. Suddenly, it appears my router is not longer broadcasting its SSID so none of the devices I had connected (EPSON Printer, 2 SAMSUNG smart TV's, 2 Iphones, 4 Ring Cameras) can connect via WiFi.
I've logged onto my router and Internet Status is good, Internet speed is good (250Mbs) but it shows WiFi status as "OFF" and I can't get it to turn on. I've also notices many of the routers display LED's that used to be on are now off.
Give this a try:
You have managed to manually turn off the Wi-Fi radios. Neither firmware updates or reset to firmware default settings or cycling the power will change the state of the on/off switch. Once turned off, it stays off until manually turned back on.
When looking from the front of the router, the last two leds on the far right are a combination indicator/switch. The second one in is the Wi-Fi radio on/off switch. Press and hold for two seconds then release. Your Wi-Fi radios should come back on.
The advice that Kitsap has given is highly likely to be the solution. I've done it myself, accidently knocked off the WiFi moving the router. I resolved it by reading through the router manual as it happens.
I'd also like to point out, from the firmware you state you have loaded on your router, that you're 3 firmware updates behind the current firmware.
If you've had your router since 2013, then you've clearly been updating the firmware over the years anyway, so how you're now 3 updates behind, only you know.
Netgear it seems have now fixed the situation whereby if there is a new update, it will show up in the browser GUI and Nighthawk App. I'm guessing it will also auto update if you enable the option. I will never personally enable the auto update option, I want some control over when the updates take place.
This isn't a dig at you directly by the way, but I can't stress the importance of folks actually reading through their router manual. It seems we live in an age where no one wants to learn how to use the kit they own these days. I also don't understand why so many people go down the road of buying a standalone router if they've no intentions of knowing how the thing works. Most people should probably just stick to using what their ISP provides them because for the most part, it's likely most customers don't have any issues using the ISP equipment as limited as it might be for someones situation.
Anyway, I hope your problem is solved.