Upstream QOS List Being Reset

Steps under MS Edge:

 

Chose Revert to factory defaults from under the administration menu.  Rebooted or shut off all machines while router was rebooting. 

 

Advanced>Setup>QOS>downstream.
-Checked both boxes and hit apply.  Router rebooted or 'updating settings'.

 

Advanced>Setup>QOS>upstream
-Checked the box and hit apply.  Router rebooted or 'updating settings'

 

Hit upstream Speed test and waited for completion.

 

clicked 'setup QOS rule'
-Deleted warcraft
-deleted everquest

 

Clicked add priority rule
-Changed category to MAC address. 
-Selected Network Attached Storage Device that had connected already. 
-Set priority to low and clicked apply. 
-Clicked apply again and verified the settings remained. 

 

Clicked Advanced Setup > Wireless Settings
-Turned off 5ghz Radio
-Clicked apply.  Router rebooted or 'updating settings'

 

Went back under the Advanced>Setup>QOS>upstream
-All settings had revereted back. 

 

Reproduced the configuration steps under IE & Chrome with the same results in that the upstream QOS is reset after enabling / disabling the 5ghz radio and hitting apply.  IE actually loaded the welcome / intro page with registration while Edge (the first brower to hit the IP) took me right in like there was no login.  Once the intro pages were done, all browsers asked for a login. 

 

I also tested it again with all the downstream options turned off and I didn't remove any upstream QOS (just added one via MAC address) and it got cleared when toggling the radio again.