NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

DrBlingDaddy's avatar
DrBlingDaddy
Aspirant
Mar 04, 2020
Solved

Using CM1150V with RAX120. Is port aggregation possible?

For normal operation of the two devices for internet it looks as if the WAN port on the RAX needs to be connected to port one on the 1150. But in order to use port aggregation the RAX, ports 1 and 2 ...
  • DrBlingDaddy's avatar
    DrBlingDaddy
    Mar 04, 2020

    Okay, so I figured it out. I needed to enable WAN aggregation on the RAX under "Setup", "Internet Setup", and "Ethernet Port Aggregation" under "Advance" on the 1150.

DrBlingDaddy's avatar
DrBlingDaddy
Aspirant
Mar 04, 2020

Okay, so I figured it out. I needed to enable WAN aggregation on the RAX under "Setup", "Internet Setup", and "Ethernet Port Aggregation" under "Advance" on the 1150.

DominicanMacPro's avatar
DominicanMacPro
Apprentice
Mar 21, 2020

So want is the difference? I currently have cm1200 port 1 plugged into wan on the rax and port 2 on modem plug into port lan 1. Creating WAN aggregation.  What are the benefits of port aggregation?

  • antinode's avatar
    antinode
    Guru
    Mar 21, 2020

    > Okay, so I figured it out. [...]

     

       Perhaps.  Perhaps not.

     

    > [...] What are the benefits of port aggregation?

     

       I'll bite.  If you don't know, then why bother doing it?

     

       The idea is that two 1Gb/s Ethernet links can cary data at
    (approximately) twice the rate of one 1Gb/s Ethernet link.  If your
    Internet service provides more than 1Gb/s, then an aggregated link
    between the modem and the router should provide more speed over that
    path.

     

       Visit http://netgear.com/support , put in your model number, and look
    for Documentation.  Get the User Manual.  Read.  Look for "Ethernet Port
    Aggregation".


       I know nothing, but as I read the User Manual for a "Nighthawk AX12
    12-Steam AX6000 WiFi Router" (carefully proofread, obviously -- I use
    only internal-combustion routers, not "Steam", and certainly not
    "12-Steam"), I see instructions for aggregating two _LAN_ Ethernet
    ports.  If it's possible to use aggregation on the WAN/Internet side of
    an RAX120, then it's not obvious to me.