Please discuss LMS for OS6 here. Continues from http://www.readynas.com/forum/viewtopic.php?f=155&t=70937

The LMS 7.8.0 version has been released.There is a debian package for it but the size is much larger than Super Poussin's 7.7.3 package. http://downloads.slimdevices.com/Logite ... er_v7.8.0/Just wait for it?

I'd be shocked if it didn't work. I only use Squeeze radios and they work just fine using the standard LMS plugin for my Rn516. If you are trying to decide between smaller ReadyNAS, I'd suggest the 21x series as they are powerful enough to even transcode via Plex.

OK have purchased a ReadyNas RN212D23 (2x3TB, Arm Quad processor) . Having looked at the various postings for getting LMS installed I could do with some guidance for getting LMS up and running! I remember the problems I had trying to get LMS installed on a ReadyNas Duo some years ago and would like to make the process a litlle less troublesome this time!) The ReadyNas as delivered was at firmware 6.4.1 but updated to 6.4.2 during setup. I've found the following sources of LMS code:Under Available Apps in the Admin pages of the ReadyNas itself is Logitech Media Server V1.0.6 developed by PoussinAt https://www.dropbox.com/sh/ie9pwk1wut72ias/AACr8V9vMB2dC5lbj03l5VyDa/Logitech%20Media%20server?dl=0 there appears to be a copy of the above file plus later releases (lms_1.0.7_all.deb, 1.08, 1.09) and Logitechmediaserver deb files (e.g. logitechmediaserver_7.7.2_all.deb, 7.7.3, 7.8.0) all supplied by PoussinAt http://downloads.slimdevices.com/ there are various versions of the above logitechmediaserver including a v7.9.0 in the nightly folder Can someone explain what the relationship is between the lms and logitechmediaserver files is (i.e. why are both needed), which versions I should use with firmware 6.4.2 and what sequence to install them in. Many thanks

Would it be possible to get a 7.7.4 or a 7.8.0 build for OS6?

Another question.Whats the best way to start over from scratch?I had 7.7.3 installed but since I had some issues with it I tried to remove it. Removal failed though.(But it was removed from the APP page) So I tried to install 7.7.2 and it failed too.The LMS package is also failing so it seems that I am stuck.Rebooted the NAS and that didnt help.EDIT: Now 7.7.2 magically appeared under APPS, so far so good.But I still have the issue with not all plugins available.Seems to be a cache issue:http://forums.slimdevices.com/showthrea ... tings-pageClearing /var/lib/squeezeboxserver/cache# didnt helpEDIT2: If you disable Extension Downloader plugin all 3rd party plugins disappears. Enable it to have them visible again

General discussion on LMS for OS6

43 Replies

Replies have been turned off for this discussion

forestpct
Guide
Feb 18, 2016
Hi. Hope it's OK to ask query on this thread regarding replacement of an old ReadyNas Duo V1. I've used this ReadyNas with the Logictech Media Server Add-on for several years to stream music from the NAS to a Logitech Duet and Logitech Radios as well as to a number of smart TVs. The NAS however has failed and I need to replace it. Posted on the Logitech Squeezebox forum about use of their add-on on newer ReadyNAS units (100 and 200 series) and was told the add-on only works on older Duo/NV v2 units but to check here for possible solutions. I found an entry here http://apps.readynas.com/pages/?page_id=9 for a Logitech Media Server app but would like to know for certain that this will allow me to stream music direct from new ReadyNas to my Duet and Radios before I commit to purchase. Appreciate it if someone could confirm this.

Thanks
- rjwerth
  Luminary
  Feb 18, 2016
  I'd be shocked if it didn't work. I only use Squeeze radios and they work just fine using the standard LMS plugin for my Rn516. If you are trying to decide between smaller ReadyNAS, I'd suggest the 21x series as they are powerful enough to even transcode via Plex.
  - forestpct
    Guide
    Feb 25, 2016
    OK have purchased a ReadyNas RN212D23 (2x3TB, Arm Quad processor) . Having looked at the various postings for getting LMS installed I could do with some guidance for getting LMS up and running! I remember the problems I had trying to get LMS installed on a ReadyNas Duo some years ago and would like to make the process a litlle less troublesome this time!)
    
    The ReadyNas as delivered was at firmware 6.4.1 but updated to 6.4.2 during setup.
    
    I've found the following sources of LMS code:
    Under Available Apps in the Admin pages of the ReadyNas itself is Logitech Media Server V1.0.6 developed by Poussin
    At https://www.dropbox.com/sh/ie9pwk1wut72ias/AACr8V9vMB2dC5lbj03l5VyDa/Logitech%20Media%20server?dl=0 there appears to be a copy of the above file plus later releases (lms_1.0.7_all.deb, 1.08, 1.09) and Logitechmediaserver deb files (e.g. logitechmediaserver_7.7.2_all.deb, 7.7.3, 7.8.0) all supplied by Poussin
    At http://downloads.slimdevices.com/ there are various versions of the above logitechmediaserver including a v7.9.0 in the nightly folder
    
    Can someone explain what the relationship is between the lms and logitechmediaserver files is (i.e. why are both needed), which versions I should use with firmware 6.4.2 and what sequence to install them in.
    
    Many thanks

Forum Discussion

General discussion on LMS for OS6

43 Replies

Related Content

Creating a New Discussion

Firmware V1.12.0.18 Discussion

LMS NT & M4A Files

Generic streaming device

LMS 7.9 on ReadyNAS Pro 6

NETGEAR Academy

ProSupport for Business