NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
On No - "Remove inactive volumes to use the disk. Disk #1,2,3,4,5,6."
First of all the volume became very slow and then went read-only. After a reboot I now get a message "Remove inactive volumes to use the disk. Disk #1,2,3,4,5,6." and the data volume is totally gone!...
Sandshark wrote:
If you already made that backup, you can save yourself some time and just delete and re-create the volume or do a factory default and restore your data from backup.
The good news is that MWT has a backup.There were a bunch of ATA errors (both read and write failures), which affected several of the disks. Three of the disks were out-of-sync when the NAS was rebooted, so the array failed to assemble.
No clear cause for the ATA errors at this point. Hopefully not the NAS hardware.
MWT wrote:
but what happened?
Download the log zip file from the logs page. It can be hard to decipher - if you like I can take a look.
Just send me a private message (PM) using the envelope icon in the upper right of the forum page. Put the log zip file into cloud storage, and include a link in the PM. Make sure the permissions are set so anyone with the link can download.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
