rnxtras.com

Try sending a PM to WhoCares? as it is his site. Or email info@readynasxtras.com

WhoCares? is on a well earned vacation (I think it's nearly finished) so his response times may be a little longer than usual. I'm sure he will be keen to look into this once he's back.

Do you see the option to register when you go to checkout?

There was a problem with one of the modules used after the automatic update of the site to WordPress 4.0. This has been fixed and works again now. Sorry for the troubles.

-Stefan

Hi,

I've just bought the RNAirPrint app on rnxtras.com.

I’ve checked my priter before and it should be supported by HPLIP.
I’ve installed RNAirPrint as per the installation guide, still I am not able to make it work.

I get “/usr/lib/cups/filter/hpcups failed” error.

Do you know any means to correct this problem?

BTW. What more does RNAirPrint do for 3 USD compared to CUPS and HPLIP? I don’t really see any more than that…?

thanks,
medoc

What's the printer model you're using? What version of hplip got installed on your ReadyNAS and is your printer supported in *that* version?
Where do you get that error?

-Stefan

WhoCares? wrote:
What's the printer model you're using? What version of hplip got installed on your ReadyNAS and is your printer supported in *that* version? Where do you get that error? -Stefan

Hi Stefan,

It's an HP LaserJet Professional P1102.
HPLIP version is 3.12.6-3.1+deb7u1

My printer is supported from 3.10.4: http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_professional_p1102.html

CUPS version is 1.5.3-5+deb7u4

Thanks for your help!

medoc

I have solved the mystery :)

The "Next comes the model selection" part cam be a bit misleading, as the top selection is the printer model in question, however it's a driver-less setup.
I overlooked that the selection box contains a lot of other real drivers as well, so I had to scroll down a lot to find my model's drivers. Now it's working like a charm.

I suggest to edit the configuration guide to highlight this, as it can be pretty much misleading.

BR,
medoc

OFF TOPIC: now the only thing I need is an arm version of automatic :) (http://github.com/1100101/Automatic)