NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
102
After updating the firmware, the device does not start. I can't connect to it because there is no ip address. the radar does not see the device. The disc 1 and disc 2 indicators are not lit. Help
antefil wrote:
1) I downloaded the firmware
Totally wrong firmware for a different ReadyNAS model. You should be using this:
1) I downloaded the firmware
2) Instruction manual
https://kb.netgear.com/21400/RAIDiator-4-1-USB-Recovery-Tool
3) Now I will try to install
Checked:
the power button and the backup button are flashing . The USB light bulb does not blink
antefil wrote:
1) I downloaded the firmware
Totally wrong firmware for a different ReadyNAS model. You should be using this:
You also need to create an OS6 recovery tool: How-do-I-use-the-USB-Recovery-Tool-on-my-ReadyNAS-OS-6-storage-system unless you have given the wrong model number.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
