NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Raidar don't find Readynas NV+ V2 after installing new network
I did a factory reset (I have a recent back-up). On the display a see 82.176.27.166 but Raidar can not find it. I have a deco mesh system.
How can I change my network configuration that my mesh system the NAS recognise.
Wietse wrote:
How can I change my network configuration that my mesh system the NAS recognise.
Whatever network configuration, whatever Mesh system? Wild guess might be your network is direct connected to what does provide a public IP address, something like a CPE, cable modem, ... and at least the computer seems to get a public IP address assigned.
- I have a deco X60 mesh system.
- Does it make sense to disconnect the system from the modem and then do an OS reinstall. Will the Readynas get a local address that will be recognized by Raidar after rebooting?
Start with a correct installation and configuration of this Deco M60 system. Like every common consumer router, there is not WAN or Internet port which has to be connected to the Cable Modem, everything else belongs to the LAN side of the Deco M60 system.
After doing so, please power-boot everything, cable modem, mesh system and probably the ReadyNAS, too.
Best starting point might be some magic documentation certainly coming with the Deco system I'm afraid - we're not TP-Link.
Wietse wrote:
- I have a deco X60 mesh system.
- Does it make sense to disconnect the system from the modem and then do an OS reinstall. Will the Readynas get a local address that will be recognized by Raidar after rebooting?
No need to do an OS reinstall. The problem is that you've hooked up the NAS to a WAN port, and it needs to be connected to a LAN port.
Have you connected it to the modem? Or have you connected it to one of the X60 LAN ports?
I had the NAS in a switch. Now I put the NAS directly in the head X60 and now Raidar can find the Nas with the message ERR_SSL_VERSION_OR_CIPHER_MISMATCH In the past, there was also a notification. If you agreed that windows was less secure, you could go into the Nas. With this notification, you can search and go to copilot, but not open the NAS. Are there now easy ways to modify windows so that the NAS works
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
