NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ready NAS Pro 2
My unit is not staying on. When button pushed, solid blue light for about 20 seconds with disk access leds, followed by blinking blue for about 30 seconds, still some disk access lights, then appears...
Does it do the same thing if your temporarily remove the drives?
Have not tried that. will do later. Thnx.
Same result, but without the disk access lights.
Seems to shut down faster with the drives in.
That tends to indicate it's not a power issue, or at least not the power brick. But it could be worthwhile trying one. Since it does the same thing without the drives, if you happen to have one, you could try a smaller supply (at least 1A) with no drives installed just to see if that's the issue before you invest in a replacement supply. But they are pretty cheap, so it's up to you if you want to just do a risk purchase of a replacement.
Bad RAM is another possibility, though I think the likelihood is also low.
Do you have a data backup? Have you converted to OS6, or was it still running 4.2.x? It'll matter if you need to look at data recovery.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
