NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
gmevi1954
Jan 14, 2023Tutor
Update ReadyNAS 2110 V2 von 4.1.6 auf aktuelle Version
Ich habe 2 Netgear Systeme Type 2110 V2 erhalten. Auf beiden Systemen wurde ein USB Recovery auf Version 4.1.6 durchgeführt. Die System starten, RAIDar zeigt beide System an. Über das ReadyNAS Fronten...
- Jan 20, 2023
Thank you for the support.
I coud upload the bin file.
regards
Gerd
Sandshark
Jan 14, 2023Sensei - Experienced User
If your NAS runs OS4.1.x, it is not actually a V2 and cannot run OS5.x. The last OS update for your NAS is 4.1.16. It is very old, and you are going to have to work around the lack of current TLS and SSL versions. You can find pointers on doing so here in the forum. But, honestly, if I were just starting to use a NAS, I would not start with those, even for free. In addition to the very old OS, they are limited to 2TB drives.
I understand that your NAS probably has a paper sticker on it claiming it's a "V2", but Netgear originally used "V2" to designate a minor hardware revision, and later re-used the "V2" designation for an entirely new NAS architecture. We refer to your model NAS as a "V1" here.
gmevi1954
Jan 14, 2023Tutor
Thank you for the quickly answer.
The second Problem with TLS and ssh fixed i temporarly through enable the old TLS 1.1 and 1.2 Version in my Browser.
I Hope that i can use the shares fron the storage in my private Network.
Regards
The second Problem with TLS and ssh fixed i temporarly through enable the old TLS 1.1 and 1.2 Version in my Browser.
I Hope that i can use the shares fron the storage in my private Network.
Regards
- StephenBJan 14, 2023Guru - Experienced User
gmevi1954 wrote:
I Hope that i can use the shares fron the storage in my private Network.You can, but with Windows you will need to go into "turn windows features on or off" and enable the SMB 1/CIFS client.
gmevi1954 wrote:
The second Problem with TLS and ssh fixed i temporarly through enable the old TLS 1.1 and 1.2 Version in my Browser.You can make a change to one of the scripts, which would let you access frontview with http (not https).
- gmevi1954Jan 19, 2023Tutor
how can i install the enalbe_SSH add on an my systems? the upload with the frontview dosnt work.
i use the Bin File: EnableRootSSH_1.0-arm.bin.
regards
Gerd
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!