NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Upgrade from 6.9.1 to 6.10 hangs
Hi.
In my RN528X I had installed the firmware 6.9.5 patch 1 release and I downloaded and installed version 6.10.0. But at the time of the reboot after the upgrade the boot reaches 99% and then ...
RN528X, more info. I tryed to do it first and i come back to 6.9.1 fix so I tried one mor time and after that it hangs in "Booting..."
Hi,
How to do that? There is no IP-address so I have no access to the NAS any more.
Regards,
/Sören
Hi,
Not sure if this will help but I had this identical problem today with a 204 unit. I had rebooted prior to the update and still it sat stuck for an hour at 99%. Multiple reboots failed to solve it and I was only semi-sure I had a valid backup.
In the end I found the bootmenu option -
For 104,204,214,314 - https://kb.netgear.com/22891/How-do-I-access-the-boot-menu-on-my-ReadyNAS-104-204-214-or-314
And 528X, 628X - https://kb.netgear.com/000036944/How-do-I-access-the-boot-menu-on-my-ReadyNAS-528X-and-628X
I was ready to factory reset but instead did OS-Reinstall - big sigh, it rebooted and took a little longer but came up fine.
Once back on volumes all online, but had to redo network settings and admin password was defaulted.
Not sure but it might help in your case.
Regards,
Mark
Sorry to inform but I fowlloing the instruction but nerver get "boot menu message". Even if I hold the reset buttom in for two minutes the display just show "Booting..."
SorenB wrote:
How to do that? There is no IP-address so I have no access to the NAS any more.
In similar cases there often is an IP address and the logs can be downloaded. So maybe download RAIDar, and see if it can discover your NAS.Sorry, there is no connection with my RN528X and still in "Booting..." position.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
