NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Your ClamAV installation is OUTDATED!
Dear Netgear admin / fellow Netgear users My readynas has now for the last year been saying that the clamav is outdated (version: 0.100.2 should be : 0.103.2) and so it doesnt seem to want to automa...
p5taylor wrote:
so trying to log in to do a soft re-start it appears that a different password has been set (not by me)
FWIW, 6.10.5 is now released. It seems unlikely that it would reset the admin password (esp. a couple of days after the update).
But you can do a clean shutdown by pressing the power button twice. See page 35 here: https://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf
Then power up the system and see if your old admin password works. If it doesn't then try the default password (which is password)
If those steps fail, you can also do an OS reinstall from the boot menu. Instructions are on page 37 of the manual I linked in above.
The OS reinstall will
- reset the admin password back to password
- reset the network configuration to use DHCP
- turn off volume quota (which can be re-enabled via the volume settings wheel).
Hi John
Sorry for not getting back to you sooner, the current version of my firmware is 6.10.2.
I dont really like being a guinea pig for beta version of software had some bad experience in the past, i normally like to only have long term support version but was forced to go with stable version for plex to work properly, I would install it, if it was stable.
Regards
Paul
Hi John
So i finally decided to buckle and installed the beta version everything seemed ok for a day or two then later i am unable to access any of my drives via my pc, so trying to log in to do a soft re-start it appears that a different password has been sewt (not by me) tried this new password (@newdig) no joy in getting in, so gone for a forgot password and reset password this isnt working either, so great now completely locked out, should of stuck with my intitial beliefs.
Regards Paul
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
