NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear Ready NAS NV+
Good day all, I hope you are well! I am facing an issue with our Netgear Ready NAS NV+ Model:RND 4000...I know that this unit may be not supported anymore, but your feedback can help me with the is...
stephanedespres wrote:
How can I see if the NIC connection has been disturbed?
The simplest thing is to just remove the ethernet connector and reinsert it.
Or if it is convenient, run another (known good) cable from the NV+ to the upstream switch.
Gigabit requires all 8 contacts to be functioning - if some are open, you can end up negotiating a slower speed. Though usually you'd end up with 100 mbit, not 10.
StephenB -thank you very much for your answer...I'll wait for the sync and restart the unit
Drives that we change are 4x1TB, thanks for the input for maximum capacity (2TB) for each drive on that unit I did not know...
How can I see if the NIC connection has been disturbed?
Best regards Stephen!
stephanedespres wrote:
How can I see if the NIC connection has been disturbed?
The simplest thing is to just remove the ethernet connector and reinsert it.
Or if it is convenient, run another (known good) cable from the NV+ to the upstream switch.
Gigabit requires all 8 contacts to be functioning - if some are open, you can end up negotiating a slower speed. Though usually you'd end up with 100 mbit, not 10.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
