Squeezebox server (logitech media server) on an RN204

Hi, I can't see a way of attaching a file to a message so I've pasted the contents of the log in the text below, clipped because of the 20,000 character message limit.

Right at the top of the file you can see my original attempt to install the LMS build, fresh from configuring and initialising the RN204 with its discs and the 6.5.1 firmware. I then tried to install LMS NT from the apps page so it should be as "clean" as it gets.

    Richard.

START(/tmp/nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb): Fri Jul 1 22:47:43 WEST 2016
Err http://egnyte-cdn.egnyte.com 6.5 InRelease

Err http://egnyte-cdn.egnyte.com 6.5 Release.gpg
Could not resolve 'egnyte-cdn.egnyte.com'
Err http://security.debian.org wheezy/updates InRelease

Err http://security.debian.org wheezy/updates Release.gpg
Could not resolve 'security.debian.org'
Err http://mirrors.kernel.org wheezy InRelease

Err http://mirrors.kernel.org wheezy Release.gpg
Could not resolve 'mirrors.kernel.org'
Err http://apt.readynas.com 6.5.1 InRelease

Err http://apt.readynas.com 6.5.1 Release.gpg
Could not resolve 'apt.readynas.com'
Reading package lists...
new debian package, version 2.0.
size 33170542 bytes: control archive=67734 bytes.
526 bytes, 14 lines control
290637 bytes, 2486 lines md5sums
322 bytes, 16 lines * postinst #!/bin/sh
220 bytes, 14 lines * postrm #!/bin/bash
406 bytes, 18 lines * preinst #!/bin/sh
Package: nastools-logitechmediaserver
Source: logitechmediaserver
Version: 7.9.0.b7dfc80-nt1
Architecture: armel
Maintainer: NAStools <dev@nas.tools>
Installed-Size: 114265
Depends: readynasos (>= 6.4.2), perl (>= 5.8.8)
Depends: readynasos (>= 6.4.2), perl (>= 5.8.8)
Found 2 dependants
pkg[1/2]= readynasos >= 6.4.2
pkg[2/2]= perl >= 5.8.8
cmd=apt-get -y install perl
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libclass-isa-perl libgdbm3 libswitch-perl perl-modules
Suggested packages:
perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make
libpod-plainer-perl
The following NEW packages will be installed:
libclass-isa-perl libgdbm3 libswitch-perl perl perl-modules
START(/tmp/nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb): Fri Jul 1 22:49:58 WEST 2016
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 7,177 kB of archives.
After this operation, 25.5 MB of additional disk space will be used.
Err http://mirrors.kernel.org/debian/ wheezy/main libgdbm3 armel 1.8.3-11
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main libclass-isa-perl all 0.36-3
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main perl-modules all 5.14.2-21+deb7u3
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main perl armel 5.14.2-21+deb7u3
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main libswitch-perl all 2.16-2
Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/g/gdbm/libgdbm3_1.8.3-11_armel.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/libc/libclass-isa-perl/libclass-isa-perl_0.36-3_all.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/p/perl/perl-modules_5.14.2-21+deb7u3_all.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/p/perl/perl_5.14.2-21+deb7u3_armel.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/libs/libswitch-perl/libswitch-perl_2.16-2_all.deb Could not resolve 'mirrors.kernel.org'
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Chking dependencies..
pkg[1/2]= readynasos >= 6.4.2
Depenency readynasos >= 6.4.2 met
pkg[2/2]= perl >= 5.8.8
Dependencies cannot meet for perl >= 5.8.8
fv-dpkginstall.awk: error 2
fv-dpkginstall.awk: success
Successfully installed dependencies for /tmp/nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb
Selecting previously unselected package nastools-logitechmediaserver.
(Reading database ... 12933 files and directories currently installed.)
Unpacking nastools-logitechmediaserver (from .../nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb) ...
dpkg: dependency problems prevent configuration of nastools-logitechmediaserver:
nastools-logitechmediaserver depends on perl (>= 5.8.8); however:
Package perl is not installed.
dpkg: error processing nastools-logitechmediaserver (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nastools-logitechmediaserver
DONE(4): Fri Jul 1 22:51:22 WEST 2016
spooler returns spool_status=4 outbuf=(null) errbuf=(null) is_localapp=1 name=nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb pkgname=nastools-logitechmediaserver
Err http://egnyte-cdn.egnyte.com 6.5 InRelease

Err http://egnyte-cdn.egnyte.com 6.5 Release.gpg
Could not resolve 'egnyte-cdn.egnyte.com'
Err http://security.debian.org wheezy/updates InRelease

Err http://security.debian.org wheezy/updates Release.gpg
Could not resolve 'security.debian.org'
Err http://apt.readynas.com 6.5.1 InRelease

Err http://apt.readynas.com 6.5.1 Release.gpg
Could not resolve 'apt.readynas.com'
Err http://mirrors.kernel.org wheezy InRelease

Err http://mirrors.kernel.org wheezy Release.gpg
Could not resolve 'mirrors.kernel.org'
Reading package lists...
new debian package, version 2.0.
size 33170542 bytes: control archive=67734 bytes.
526 bytes, 14 lines control
290637 bytes, 2486 lines md5sums
322 bytes, 16 lines * postinst #!/bin/sh
220 bytes, 14 lines * postrm #!/bin/bash
406 bytes, 18 lines * preinst #!/bin/sh
Package: nastools-logitechmediaserver
Source: logitechmediaserver
Version: 7.9.0.b7dfc80-nt1
Architecture: armel
Maintainer: NAStools <dev@nas.tools>
Installed-Size: 114265
Depends: readynasos (>= 6.4.2), perl (>= 5.8.8)
Depends: readynasos (>= 6.4.2), perl (>= 5.8.8)
Found 2 dependants
pkg[1/2]= readynasos >= 6.4.2
pkg[2/2]= perl >= 5.8.8
cmd=apt-get -y install perl
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libclass-isa-perl libgdbm3 libswitch-perl perl-modules
Suggested packages:
perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make
libpod-plainer-perl
The following NEW packages will be installed:
libclass-isa-perl libgdbm3 libswitch-perl perl perl-modules
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 7,177 kB of archives.
After this operation, 25.5 MB of additional disk space will be used.
Err http://mirrors.kernel.org/debian/ wheezy/main libgdbm3 armel 1.8.3-11
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main libclass-isa-perl all 0.36-3
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main perl-modules all 5.14.2-21+deb7u3
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main perl armel 5.14.2-21+deb7u3
Could not resolve 'mirrors.kernel.org'
Err http://mirrors.kernel.org/debian/ wheezy/main libswitch-perl all 2.16-2
Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/g/gdbm/libgdbm3_1.8.3-11_armel.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/libc/libclass-isa-perl/libclass-isa-perl_0.36-3_all.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/p/perl/perl-modules_5.14.2-21+deb7u3_all.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/p/perl/perl_5.14.2-21+deb7u3_armel.deb Could not resolve 'mirrors.kernel.org'
E: Failed to fetch http://mirrors.kernel.org/debian/pool/main/libs/libswitch-perl/libswitch-perl_2.16-2_all.deb Could not resolve 'mirrors.kernel.org'
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Chking dependencies..
pkg[1/2]= readynasos >= 6.4.2
Depenency readynasos >= 6.4.2 met
pkg[2/2]= perl >= 5.8.8
Dependencies cannot meet for perl >= 5.8.8
fv-dpkginstall.awk: error 2
fv-dpkginstall.awk: success
Successfully installed dependencies for /tmp/nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb
Selecting previously unselected package nastools-logitechmediaserver.
(Reading database ... 12933 files and directories currently installed.)
Unpacking nastools-logitechmediaserver (from .../nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb) ...
dpkg: dependency problems prevent configuration of nastools-logitechmediaserver:
nastools-logitechmediaserver depends on perl (>= 5.8.8); however:
Package perl is not installed.
dpkg: error processing nastools-logitechmediaserver (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nastools-logitechmediaserver
DONE(4): Fri Jul 1 22:54:53 WEST 2016
spooler returns spool_status=4 outbuf=(null) errbuf=(null) is_localapp=1 name=nastools-logitechmediaserver_7.9.0.b7dfc80-nt1_armel.deb pkgname=nastools-logitechmediaserver
START(/tmp/logitechmediaserver_7.7.3_all.deb): Fri Jul 8 08:11:34 WEST 2016
Err http://mirrors.kernel.org wheezy InRelease

Err http://mirrors.kernel.org wheezy Release.gpg
Could not resolve 'mirrors.kernel.org'
Err http://egnyte-cdn.egnyte.com 6.5 InRelease

Err http://egnyte-cdn.egnyte.com 6.5 Release.gpg
Could not resolve 'egnyte-cdn.egnyte.com'
Err http://security.debian.org wheezy/updates InRelease

Err http://security.debian.org wheezy/updates Release.gpg
Could not resolve 'security.debian.org'
Err http://apt.readynas.com 6.5.1 InRelease

Err http://apt.readynas.com 6.5.1 Release.gpg
Could not resolve 'apt.readynas.com'
Reading package lists...
new debian package, version 2.0.
size 101126100 bytes: control archive=72361 bytes.
252 bytes, 7 lines conffiles
544 bytes, 13 lines control
262452 bytes, 2622 lines md5sums
2039 bytes, 71 lines * postinst #!/bin/sh
469 bytes, 25 lines * postrm #!/bin/sh
919 bytes, 41 lines * preinst #!/bin/sh
305 bytes, 11 lines * prerm #!/bin/sh
Package: logitechmediaserver
Version: 7.7.3
Architecture: all
Maintainer: Logitech/Slim Devices <debian@slimdevices.com>
Installed-Size: 251904
Depends: perl (>= 5.8.8), adduser, libc6
Depends: perl (>= 5.8.8), adduser, libc6
Found 3 dependants
pkg[1/3]= perl >= 5.8.8
cmd=apt-get -y install perl
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libclass-isa-perl libgdbm3 libswitch-perl perl-modules
Suggested packages:
perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make
libpod-plainer-perl
The following NEW packages will be installed:
libclass-isa-perl libgdbm3 libswitch-perl perl perl-modules
START(/tmp/logitechmediaserver_7.7.3_all.deb): Fri Jul 8 08:13:17 WEST 2016

Although I thought I'd posted the log eearlier today it doesn't look like it appeared. Very odd. either way it showed up straight away these sort of errors:

Err http://mirrors.kernel.org/debian/ wheezy/main libgdbm3 armel 1.8.3-11
Could not resolve 'mirrors.kernel.org'

Which immediately points to a DNS problem. Sure enough becuase I'd set a static IP address that hadn't been set up.

I wonder why "jen" had the same problem then?

At this point I seem to be up and running, the app instlled and has fired up. Thanks for the pointer to the log file, it feels like a document from NetGear on the logs files and what they tell us would be very helpful. I had no idea to look at install_debpkg.log

    Richard.