NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Cannot access the NAS 516 via network after update to 6.5.1 - have to force-reboot
I am also experiencing similar issues with my NAS RN 516 over the past few weeks. Model: Readynas 516 Serial: 3c82350N01C41 Model: Readynas Pro 6 Serial: 2H051CRM00033 No matter wh...
Have replaced all disks with 5TB ones and have done a Factory Reset. Everything seems to be back in proper working order.
Check for a full root volume and if that has plenty of space then download the logs and send those in (see the Sending Logs link in my sig).
As for the GPF on the Pro 6, is your Pro 6 connected to a 100Mbit Ethernet port on a router rather than a Gigabit (1000Mbit) one?
I have just ordered new 5TB HGST 128MB disk drives which I will use to replace my existing 4TB Red drives as I am currently running at approx. 80% volume capacity. Once they arrive, I will perform a full default-reset before restoring my data which is backed-up to the Pro 6. Will observe how it behaves from there and post any observations/issues.
So far, since I disabled ReadyCloud and Replicate and disabled SMB 1.0/CIFS File Support and enabled SMB Direct I have been able to map both NASes and retain connected.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
