NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Can't find shares in windows 10
Hello,
Since I had some problems with connecting my ready nas (Ultra 2) I reset the unit to factory settings. And did do a new install (with new firmware).
Now I do have the problem that I ...
//nas-ip-address will open your browser, \\nas-ip-address is need to access shares over SMB.
It's most likely that your issue is because Microsoft is deprecating the SMB 1.0/CIFS client in Windows, and OS 4.2.x NAS don't support the newer SMB 3.0 protocol.
Go into "turn windows features on or off", and see if the SMB 1.0 client is installed. If it's not, then install it and reboot the PC. Then try the \\nas-ip-address again. If it still fails, you might also need to enter NAS credentials in the windows credential manager. Post back if that's the case.
//nas-ip-address will open your browser, \\nas-ip-address is need to access shares over SMB.
It's most likely that your issue is because Microsoft is deprecating the SMB 1.0/CIFS client in Windows, and OS 4.2.x NAS don't support the newer SMB 3.0 protocol.
Go into "turn windows features on or off", and see if the SMB 1.0 client is installed. If it's not, then install it and reboot the PC. Then try the \\nas-ip-address again. If it still fails, you might also need to enter NAS credentials in the windows credential manager. Post back if that's the case.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
