NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Case: 17190439 - Lost disk on uppgrade to 4.18 [CLOSED]
Readynas NV+ (V2) with 3 1TB disk was working with no problems. Uppgraded to 4.18 and all went ok, unti asked for reboot and then: After reboot disk 1 started to blink on green LED and ended after m...
Are you dead certain that you have an NV+ v2? It has been out less than a week. It also does not run RAIDiator 4.1.x at all.
Contact Tech Support and open an online case. The unit should have booted with a single disk failure, it sounds as if you may have more than one disk problem.
You can also connect each disk to a PC via an SATA port on the MB and run the vendor tools. Connecting via USB or eSATA enclosure will not work.
Contact Tech Support and open an online case. The unit should have booted with a single disk failure, it sounds as if you may have more than one disk problem.
You can also connect each disk to a PC via an SATA port on the MB and run the vendor tools. Connecting via USB or eSATA enclosure will not work.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
