NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Deleting iSCSI LUN did not free my disk space
Hello, I am experiecing the same issue as described in the two previous posts below. viewtopic.php?f=23&t=77500 viewtopic.php?f=23&t=77864 I created some iSCSI LUN's for testing, i renamed a...
I have only created iSCSI shares on 6.1.9, so I dont know if the problem was there on earlier versions.
I got hold of some spare disk's now so i can preform a factory reset after i have copied everything.
After i have done that i will try to create a iSCSI LUN and see if the problem is still there.
About the load cycle count. I can see et is very high. I found this article regardig WD disk's http://www.timoroso.com/journal/9
Are you familliar with a way to use “wdidle3” on the RN104?
I got hold of some spare disk's now so i can preform a factory reset after i have copied everything.
After i have done that i will try to create a iSCSI LUN and see if the problem is still there.
About the load cycle count. I can see et is very high. I found this article regardig WD disk's http://www.timoroso.com/journal/9
Are you familliar with a way to use “wdidle3” on the RN104?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
