NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Drive replacement rebuild status
Hi, I started a vol expansion on my ReadyNAS Pro Bus, replacing drive 1 with a new 3TB drive (ST33000650NS on the HCL, my 2nd one). I'm on RAIDiator 4.2.27, configured as X-RAID2. The drive tested f...
What other drives are in the nas currently?
What drives were in the nas when it was initially setup and was this the last time the unit was factory defaulted?
Do you have a backup?
If you don't have a backup, then make one now, then reboot the nas, perhaps a few times if the rebuild doesn't start.
If you have a backup you can either try removing the drive and reinserting it after the nas recognises a drive removal ;and/or reboot the nas.
I suspect a reboot is all that is required.
What drives were in the nas when it was initially setup and was this the last time the unit was factory defaulted?
Do you have a backup?
If you don't have a backup, then make one now, then reboot the nas, perhaps a few times if the rebuild doesn't start.
If you have a backup you can either try removing the drive and reinserting it after the nas recognises a drive removal ;and/or reboot the nas.
I suspect a reboot is all that is required.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
