NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
EDA500 Discontinued
I've read the forum posts mentioning that the EDA500 is discontinued... over a year ago. Why would Netgear continue to list it as a viable option under their latest and greatest Home ReadyNAS here? ...
Those of us who have an EDA500 might need to know what replacement NASes support it.
Sandshark wrote:
Those of us who have an EDA500 might need to know what replacement NASes support it.
Yes, but I think just saying that it is compatible with the EDA500 is sufficient. Providing specs on storage limits with expansion will mislead more people than it helps.
StephenB wrote:
Yes, but I think just saying that it is compatible with the EDA500 is sufficient. Providing specs on storage limits with expansion will mislead more people than it helps.
With the quickly growing SATA HDD capacities there is soon no more need for the EDA500 to reach the total capacities advertised.
Interesting development in the market is coming from the competition, QNAP started a series of external RAID enclosures on USB 3.0 (SUB 3.1 Gen 1) designated TR-002 and TR-004 with an USB-C port, where the external RAID controller and the SATA drives can be managed and monitored from the NAS itself, and allowing a single RAID config. At much lower cost, these are intended to replace the smaller (but pricey) UX-[5|8]00P - where each SATA port was addressed individually from the NAS host by USB Attached SCSI (UAS) with the RAID ops on the NAS host.
With ReadyNAS, we're missing the continuity of products, like no successor for the EDA.
schumaku wrote:
With ReadyNAS, we're missing the continuity of products, like no successor for the EDA.
Personally I didn't find the EDA to be compelling - the price seemed high, and the performance didn't meet expectations. Adding on a second NAS seemed like a better option to me. The TR004 looks more interesting - less expensive, and it sounds like it's higher performance.
It'd be good if Netgear would add USB-C/Thunderbolt on future ReadyNAS. That could also be used for console output.
StephenB wrote:
Personally I didn't find the EDA to be compelling - the price seemed high, and the performance didn't meet expectations.
Well, end users see a box that looks similar to a NAS, and they expect mid- to high-end NAS performance also from the expansion.
StephenB wrote:
Adding on a second NAS seemed like a better option to me.
Value priced NAS with 10 GbE plus a few 1 GbE interfaces plus some M.2 SATA-SSD slots are available below 400 USD already - tha'ts a big competition for expansion units.
StephenB wrote:
The TR004 looks more interesting - less expensive, and it sounds like it's higher performance.
One has to realize that the EDA500 was connected by "just" a single eSATA (so max 6 Gb/s) where all the individual disk traffic and RAID operations had to be pushed over. QNAP TR are USB 3.0 (USB 3.0 Gen 1) connected, so peak 5 Gb/s for plain data transfer (a little bit more efficient, especially with RAID operations like resync, migration, scrubbing ongoing). So the price of the expansion must be "right" - matching the possible performance - otherwise only limited success (for all vendors).
StephenB wrote:
It'd be good if Netgear would add USB-C/Thunderbolt on future ReadyNAS. That could also be used for console output.
The competiton is ahead, not only on hardware features.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
