NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Hard lock with: bfq_lookup_next_entity+eb, rebooting shows duplicate volumes
My ReadyNAS 204 hard locked this evening, and the display was showing "bfq_lookup_next_entity+eb". After a powercycle, the NAS ran the pending 6.7.5 firmware update (from 6.7.1), and proceeded to begin resyncing. At this time, I have two "Data" volumes showing -- my previous configuration only had one... -- one showing as Raid 5, the other showing as Raid unknown. None of my disks appear to be associated, and the warning showing when I click the "Raid 5" Data volume is to "Remove inactive volumes to use this disk. Disk # 1, 2, 3, 4, 2, 3, 4" which seems like a bad move to me.
I've got about 20hours left on this resync. I'm already frustrated since all of my shares are offline during this time. Is there anything that can be done to attempt to ensure that the volumes recover?
Volume rebuild completed after roughly 23 hours, but volume did /not/ remount. Did some btrfs fscking and remounting, and managed to recover all of my subvolumes/shares.
4 Replies
Replies have been turned off for this discussion
Your shares are not accessible via SMB?
That's not a good sign.
Hello jeremydk,
Can you post a screenshot of what you see under Volumes?
You might need to contact support team.
Welcome to the community!
Regards,
Volume rebuild completed after roughly 23 hours, but volume did /not/ remount. Did some btrfs fscking and remounting, and managed to recover all of my subvolumes/shares.
Could do please enable secure diagnostic and PM me the 5 digitals?
Let me remote access to check,
You may enable secure diagnostic using RAIDar,
https://kb.netgear.com/27391/ReadyNAS-RAIDar-6-0
or enable it in NAS admin GUI System => Settings => Support.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
