NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
help R102
been using the NAS for monhs no problem, then had a power cut and it went to s##t....can do anything with it.....tried resetting the OS boot but nothing, tried accessing the drive via the admin page,...
Hi DPH1968
Have you tried to install RAIDar, to see what it reports of status?
Link here: https://kb.netgear.com/20684/ReadyNAS-Downloads
Scroll down to the RAIDar section and install "RAIDar 6.5 for Windows". Afterwards, open RAIDar and check what it say about the NAS.
That is a good place to start.
Cheers
ive installed the software and the status is showing as TFTP_REQ
Yes, this can happen sometimes. Usually a problem with the filesystem on the internal flash (the OS), a failing internal flash (which would mean bad chassis) or corrupt files on the internal flash. You can do a USB recovery to re-install the content of the Flash.
https://kb.netgear.com/29952/How-do-I-use-the-USB-Recovery-Tool-on-my-ReadyNAS-OS-6-storage-systemWorth a go
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
