NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Intel® Atom™ Processor C2000 Product Family Errata AVR54
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c2000-family-spec-update.pdf AVR54 states: I know my RN316 uses a D2700 CPU, but are any ReadyNAS...
Through the postings on this community web site, and other sources, NETGEAR has been made aware of a component which may increase the risk of a hardware failure on our ReadyNAS 3130, ReadyNAS 3138. We consider issues such as these very serious. We are currently assessing the specific risk of this issue on two products and expect to share the results of our assessment with the impacted customers within a week. We stand by the products with our warranty program, which is among the best in the industry. We will make every effort to minimize possible negative impacts to our customers.
UPDATE: Please see NETGEAR Support Service Note for RN3130, RN3138, WC7500, and WC7600v2
StephenB wrote:
bridges86406 wrote:I have the RN3138. It has a C2000 family processor (specifically C2558) .
I checked the desktop NAS, but didn't check the rackmount. The RN3130 and RN3138 both have these processors.
bridges86406 wrote:I wonder how Netgear is going to handle this?
I don't work for them, so I have no idea.
The ReadyNAS are covered by the 5 year hardware warranty (assuming you purchased new from an authorized reseller). So you would be entitled to an RMA if you see a failure.
Also, reading through the AVR, it appears that this problem only happens if there is another failure on the system board (that is, if the LPC clocks stop functioning). Are you seeing any issues on your own system that might be caused by this AVR?
It was just a rhetorical comment that I will be contacting Netgear about.
I don't think it's a good strategy to just hope that it doesn't die in 5 years, considering the supplier is stating they know that it can/will fail. I purchased this $1,100+ NAS with the hope that it would work for me until I am ready or need to replace it. A NAS that has a part that is known to have a substantial failure rate is worthless.
Through the postings on this community web site, and other sources, NETGEAR has been made aware of a component which may increase the risk of a hardware failure on our ReadyNAS 3130, ReadyNAS 3138. We consider issues such as these very serious. We are currently assessing the specific risk of this issue on two products and expect to share the results of our assessment with the impacted customers within a week. We stand by the products with our warranty program, which is among the best in the industry. We will make every effort to minimize possible negative impacts to our customers.
UPDATE: Please see NETGEAR Support Service Note for RN3130, RN3138, WC7500, and WC7600v2
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
