NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Lost contact with NAS after upgrading Windows 10
I have recently upgraded Windows 10 on my computer and after the upgrade I appear to have lost contact with the NAS. When I click "Browse" in RAIDar I get the following error message (translated to E...
Options include
- Installing the SMB 1.0 client on your Windows system. You do this by going into "turn windows features on or off"
- Installing the NFS client in Windows and enable NFS in the NAS.
- Converting your NAS to run OS-6. This is unsupported by Netgear, but would give you SMB 3.0
Options include
- Installing the SMB 1.0 client on your Windows system. You do this by going into "turn windows features on or off"
- Installing the NFS client in Windows and enable NFS in the NAS.
- Converting your NAS to run OS-6. This is unsupported by Netgear, but would give you SMB 3.0
The first option is advised against for safety reasons.
The second option is not ideal either, since one of the three computers connected to the NAS does not run Windows 10 Pro.
Remains the third option. Any instructions available on how to?
Note that nas-central.org isn't up anymore.
As I feared, the solution was somewhat above my technical level. I suppose there's no simple way to upgrade the existing system to handle SMB2?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
