NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New disk added, restripe finished, then disk failure
I've got an NV+v2 with 2 x WD20EARX, and have just added a third drive (also WD20EARX). However, despite seeming to recognise the drive and start checking/restriping, the drive (drive 3) was showing a...
Probably worth adding that no new data has been added to the system since the restripe, if that makes any difference...
Strangely, looking at the status of the system via the web interface, it thinks that all 3 disks are ok (all showing green), and that the volume is ok too.
Maybe I should have run the wdidle util on the drives before I used them - if so, a note to this *REALLY* needs to be put on the hardware compatibility list.
Strangely, looking at the status of the system via the web interface, it thinks that all 3 disks are ok (all showing green), and that the volume is ok too.
Maybe I should have run the wdidle util on the drives before I used them - if so, a note to this *REALLY* needs to be put on the hardware compatibility list.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
