NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Problem with RAIDar finding Readynas ultra 2 plus
Hi - I am an absolute newbie and really struggling to get RAIDar to recognize my readynas. When begining installation yesterday I installed a single drive (Seagate Barracuda LP 2TB ST2000DL003) and...
Considering
1. You can access Frontview via a direct connect
2. You state there is no Firewall operating
3. You have recently upgraded your firmware which means the NAS software should be OK
RAIDar should therefore work and I've not encountered such a situation where it does not (You are running RAIDar while directly connected right?)
Last 2 options are 1) Factory Reset 2) contact Tech Support
There are ways to diagnose this further but are beyond what a user should typically be expected to try.
Note that a factory reset will ensure you have a good NAS firmware setup, but will erase any data on your NAS. Details of how to do this are in the FAQ
1. You can access Frontview via a direct connect
2. You state there is no Firewall operating
3. You have recently upgraded your firmware which means the NAS software should be OK
RAIDar should therefore work and I've not encountered such a situation where it does not (You are running RAIDar while directly connected right?)
Last 2 options are 1) Factory Reset 2) contact Tech Support
There are ways to diagnose this further but are beyond what a user should typically be expected to try.
Note that a factory reset will ensure you have a good NAS firmware setup, but will erase any data on your NAS. Details of how to do this are in the FAQ
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
