NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Process to 'migrate' 4.2.x disks from Ultra 2P to new 314
I've been searching on how to get the two X-RAID disks from my broken Ultra 2 Plus to a shiny new 314 box. mgdm has talked about migrating disks and booting 4.2.x. I have put in a brand new 3tb disk...
1. Power down
2. Remove the spare disk
3. Put the disks from the Ultra in the 314 (same order as before)
4. Power on normally
5. If you can't access your data, power off the system and let me know. Do not proceed with the following steps
If you can access your data then you should be able to copy your data off to another location.
6. Once your data has been backed up and you have verified that the backup is good, do a factory default (wipes all data, settings, everything) to wipe the disks and install 6.2.3 onto them.
7. Restore your data from backup.
2. Remove the spare disk
3. Put the disks from the Ultra in the 314 (same order as before)
4. Power on normally
5. If you can't access your data, power off the system and let me know. Do not proceed with the following steps
If you can access your data then you should be able to copy your data off to another location.
6. Once your data has been backed up and you have verified that the backup is good, do a factory default (wipes all data, settings, everything) to wipe the disks and install 6.2.3 onto them.
7. Restore your data from backup.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
