NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAIDiator 4.1.13 (sparc) / 4.2.25 (x86) is now available?
Sticky Topic ref: RAIDiator 4.1.13 (sparc) is now available? and RAIDiator 4.2.25 (x86) is now available?
Have NV+ ver 1 running 4.1.12. Did remote update and claims 4.1.12 is latest. Downloaded 4.1.13 update zip file and loaded using local update. Returns with invalid file pop-up. Tried each method twice to make sure.
Have an Ultra+ 4 running 4.2.24 also. Same result. Remote update says have latest. Local update says file is not valid for the architecture.
Had just finished a quarterly backup and reboot after DLNA service stopped working on the NV+. Upon reboot, NV+ logs had zero'ed out and system showed 0MB used and 0 MB available even though file shares all appeared normal. So thought doing the update would clear the problem. Simply reinstalled 4.1.12 and that cleared the RAIDiator issue.
Update:
mdgm wrote: You have to unzip the zip file and upload [just] the firmware image to do a local install.
Thanks mdgm. Been doing too many Android updates of late to pay attention to that.
13 Replies
Replies have been turned off for this discussion
- Not surprised, they only half released it it seems. I posted on the forums here so others could see it was available. Not sure when the update.readynas.com server will get it also.
So for now, use the manual update. GPL for developers also doesn't work for 4.2.25. - Thanks for checking.
I guess it will be good to wait till a more formal announcement, i.e. remote update finds the new update. - It's pretty formal when http://downloadcenter.netgear.com/ lists it. That is managed by global NTGR staff. Different staff does the update server, specific to the ReadyNAS team; which looking at the coverage on the forums by them, it's been stale lately...
- You have to unzip the zip file and upload the firmware image to do a local install.
- 4.2.25 Is it a case of the tail wagging the dog? Large post due to firmware update not working and finding the latest version available.
RAIDiator x86 (for ReadyNAS Ultra, Pro, NVX, 2100, 3100, 3200, 4200)
Latest: November 26, 2013 – Version 4.2.25 http://www.downloads.netgear.com/files/ ... 4.2.25.zip
RAIDiator arm (for ReadyNAS Duo/NV+ v2)
Latest: September 23, 2013 – Version 5.3.9 http://www.downloads.netgear.com/files/ ... V5.3.9.zip
RAIDiator Sparc (for ReadyNAS Duo/NV+)
Latest: November 26, 2013 – Version 4.1.13 http://www.downloads.netgear.com/files/ ... 4.1.13.zip
Different Realease notes for each chipset, please read from http://kb.netgear.com/app/answers/detai ... /related/1
Release Notes http://kb.netgear.com/app/answers/detail/a_id/24238
RAIDiator-x86 Version 4.2.25
November 26, 2013
NETGEAR is pleased to announce the release of RAIDiator 4.2.25 (x86), the latest firmware for the following ReadyNAS network attached storage products:
ReadyNAS 1500
ReadyNAS 2100
ReadyNAS 3100
ReadyNAS 3200
ReadyNAS 4200
ReadyNAS Ultra 2/Plus
ReadyNAS Ultra 4/Plus
ReadyNAS Ultra 6/Plus
ReadyNAS Pro 2
ReadyNAS Pro 4
ReadyNAS Pro 6
ReadyNAS Pro Business Edition
ReadyNAS Pro Pioneer Edition
ReadyNAS NVX
ReadyNAS NVX Pioneer Edition
The simplest way to update is to use the System/Update/Remote tab in FrontView. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.25. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.
The following are changes since RAIDiator 4.2.24.
New features and Enhancements
Support Time Machine on OSX 10.9
Fixed SMB backup issue from recent OSX SMBX.
Updated Frontview to fix various user reported issues and security concerns.
Updated SMB service.
Updated AFP service.
Updated Vault service.
Published 11/26/2013 06:06 PM | Updated 11/26/2013 06:06 PM
http://kb.netgear.com/app/answers/detai ... /related/1
ReadyNAS Downloads
The following software images are available for download.
RAIDar
RAIDar is used to discover ReadyNAS devices on the network and start the ReadyNAS web-based configuration utility.
Latest: June 20, 2013 – Version 4.3.8
Download RAIDar™ for Windows – 2.61 MB
Download RAIDar™ for Mac OS X – 2.11 MB
Download RAIDar™ for Linux (Generic) – 1.31 MB
Download RAIDar™ for Linux (RPM) – 1.3 MB
RAIDiator x86 (for ReadyNAS Ultra, Pro, NVX, 2100, 3100, 3200, 4200)
RAIDiator is the firmware that drives the ReadyNAS devices. You can elect to perform a remote update from your ReadyNAS device using FrontView, or you can download this image and perform a local update.
Latest: November 26, 2013 – Version 4.2.25, Release Notes
Download RAIDiator-x86 - 53.8 MB
RAIDiator arm (for ReadyNAS Duo/NV+ v2)
RAIDiator is the firmware that drives the ReadyNAS devices. You can elect to perform a remote update from your ReadyNAS device using the Dashboard, or you can download this image and perform a local update. Note: Firmware for v1 and v2 devices is not compatible, choose the correct image.
Latest: September 23, 2013 – Version 5.3.9, Release Notes
Download RAIDiator-arm - 84.1 MB
RAIDiator Sparc (for ReadyNAS Duo/NV+)
RAIDiator is the firmware that drives the ReadyNAS devices. You can elect to perform a remote update from your ReadyNAS device using FrontView, or you can download this image and perform a local update.
Latest: November 26, 2013 – Version 4.1.13, Release Notes
Download RAIDiator - 59.6 MB
ReadyNAS Surveillance
ReadyNAS Surveillance is an add-on application, which turns your ReadyNAS device into a Network Video Recorder (NVR).
Latest: Version 1.2.0.4, Release Notes
ReadyNAS Surveillance Add-on Surveillance Add-on to install on ReadyNAS - 40.7 MB
Windows Application (v1.1.0.12) Download Link
Android Application Download Link
Apple App Store iphone/ipad application Download Link
RAIDar Widgets
RAIDar Widgets are small lightweight widgets that will work on the Mac OS X as well as in the Yahoo! Widget Engine environments. The functionality is similar to RAIDar but may be more suitable in a single ReadyNAS environment.
Latest: August 29, 2008 – Version 1.12
Download RAIDar™ Widget for Yahoo! Widget Engine – 475 KB
Download RAIDar™ Widget for Mac OS X – 328 KB
Download BETA RAIDar™ Widget for Mac OS X – 328 KB
ReadyNAS SNMP MIB
SNMP MIB file for ReadyNAS running RAIDiator version 4.1.3 or later. SNMP service will need to be enabled in FrontView on the ReadyNAS.
Latest: June 19, 2008
Download READYNAS-MIB.txt – 16 KB
ReadyNAS Add-Ons
Please see our dedicated Add-Ons page for more details.
ReadyNAS Add-Ons
ReadyNAS GPL
Please see our dedicated GPL page for more details.
ReadyNAS GPL Resources
Document Type:
Knowledge Base > Generic Articles > General Information
Published 04/26/2012 02:29 AM | Updated 11/26/2013 06:22 PM - The release notes are also included in the zip file when you extract the contents of the zip file you get the firmware and a HTML file containing the Release Notes.
- Successfully upgraded to RAIDiator-x86 Version 4.2.25 from a version prior to RAIDiator-x86 Version 4.2.24(I skipped the .24 version).
I have notice that when I tried to install MyPlex PlexMediaServer-0.9.8.10.215-020456b-i686.bin that I could not as there is another similar service running, so Im guessing that the .25 has an updated DLNA or similar service running?
Anyone notice a similar issue ? - May be a bug in /etc/default/services checks, is Plex already listed in there?
- yep
PLEXMEDIASERVER=0
PLEXMEDIASERVER_SUPPORT=1 - Maybe remove those lines then try installing Plex again.
If you had Plex installed and removing those lines fixes the issue it suggests there is a bug.
Those lines should be there when the add-on is already installed.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
