NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
nas pauses at welcome screen
I am noticing sometimes my readynas314 stops at welcome screen with the power button blinking blue. I then press and it reboots fine. This doesn't happen often but recollect happens once a month or on...
aniraghome wrote:
I am noticing sometimes my readynas314 stops at welcome screen with the power button blinking blue. I then press and it reboots fine. This doesn't happen often but recollect happens once a month or once little over a month. ...
My question is
Is there a hardware fail or possibly one in process how can i assess and remediate it?
Or is this setup of usb hub that is causing this
You could try downloading the full log file zip, and looking for errors in there. There might not be anything at the time of failure (since the system apparently hung), but there might be some at other times.
You could run the disk test from the volume settings wheel, and see what it reports. If you've never run the other maintenance functions (balance and scrub) you might want to run them (one at a time) after the disk test completes.
I think the only way to see if the USB gadgets are triggering this is to disconnect them. But if the failures are only ~once a month it would take a long time to confirm.
Yes i download the full log and review diskinfo and smart history log for errors so far i have not seen any. Is there a anything else i can review.
Yes i also run all maintemance tools on a periodic basis dont see any flags there either.
I am suspecting the usb connections but cannot prove that. But one of the passports connected occasionally becomes read only then i have to connect it to my win pc and do a scan and fix process.i have checked this passport for errors and its in good condition. I am totally lost.
Yes i also run all maintemance tools on a periodic basis dont see any flags there either.
I am suspecting the usb connections but cannot prove that. But one of the passports connected occasionally becomes read only then i have to connect it to my win pc and do a scan and fix process.i have checked this passport for errors and its in good condition. I am totally lost.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
