NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas 102 volumes disappeared
Hi there. I need your help to save my data. My volumes disappeared after I started up my ReadyNas this morning. The system now shows the message: "Remove innactive volumes to use the Disk: n1,2....
Thank you for your answer Sandshark.
I'm not in fact confortable with command lines but before contacting support I've tried several times to access via read only mode but I do not get access to the Admin page. After trying it also on direct connection I've been blocked.Waiting the 5 minutes did not work, so I reinstalled the OS and now I cannot even access the nas.
My web navigator tells me the server refused the connection. Installed RAIDar to check the IP and it tells me the NAS is healthy and that the disks 1 and 2 are healthy too. The IP address remains the same.
Anything else I could do before signing up to the support?
JeffPach wrote:
Anything else I could do before signing up to the support?
If you didn't try these tests, then I'd do them before contacting support:
- boot read-only with only disk 2 installed
- If that also fails, boot read-only with only disk 1 installed
Power down the NAS when removing/replacing the disks. I recommend labeling the disks by slot as you remove them, so they won't get mixed up later.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
