NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 102
Hello, After a number of years working perfectly, my ReadyNAS 102 has the following problem: I cannot access the administration webpage- it just says it is loading and eventually times out. ...
Your data volume is getting fairly full and there is a lot of fragmentation.
We recommend keeping volume usage under 80%. If you want to go a little above that regular scheduled volume maintenance is important.
The disk with ATA errors looks like it is failing.
Would be advisable to backup your data, do a factory reset, be more selective as to which shares to use bit-rot protection and snapshots on and restore your data from backup.
Hi barney2074,
Welcome to the community!
Can you share the logs that you extracted from your device?
Kind regards,
BrianL
NETGEAR Community Team
Hi Brian
1. When I boot up normally, I get the below usinf SSH- I ready something about Apache not starting up & n oticed it was not running
It seems to stop responding after about 10 minutes
2. When I boot in read-only mode, I have downloaded the log files via web GUI to this location:
It seems to run indefinitely when I do this
https://www.dropbox.com/sh/sk3tbq8fgew2s51/AABHvGWW4ONgg4-poK7JlR0ua?dl=0
thanks for your help
Andrew
root@NAS:~# service --status-all
[ - ] apache2
[ + ] avahi-daemon
[ - ] bootlogs
[ ? ] bootmisc.sh
[ ? ] checkfs.sh
[ ? ] checkroot-bootclean.sh
[ - ] checkroot.sh
[ + ] connman
[ + ] cron
[ - ] ctscand
[ + ] dbus
[ - ] forked-daapd
[ - ] hostname.sh
[ ? ] hwclock.sh
[ ? ] killprocs
[ ? ] leafp2p
[ - ] lsyncd
[ + ] mdadm
[ - ] minissdpd
[ ? ] mountall-bootclean.sh
[ ? ] mountall.sh
[ ? ] mountdevsubfs.sh
[ ? ] mountkernfs.sh
[ ? ] mountnfs-bootclean.sh
[ ? ] mountnfs.sh
[ ? ] mtab.sh
[ + ] nfs-common
[ - ] nfs-kernel-server
[ ? ] noflushd
[ - ] nut-client
[ - ] nut-server
[ + ] procps
[ - ] rmnologin
[ + ] rpcbind
[ + ] rsync
[ ? ] sendsigs
[ - ] snmpd
[ + ] ssh
[ + ] udev
[ ? ] udev-mtab
[ ? ] umountfs
[ ? ] umountnfs.sh
[ ? ] umountroot
[ - ] ups-monitor
[ - ] urandom
Hi Barney2027,
It seems your Volume is Full and this is causing the problem.
I will suggest copying your date external and make a Factory reset. You are able to Copy the date through the Read Only Mod.
=== df -h ===
Filesystem Size Used Avail Use% Mounted on
tmpfs 10M 4.0K 10M 1% /dev
/dev/md0 4.0G 835M 2.9G 23% /
tmpfs 249M 0 249M 0% /dev/shm
tmpfs 249M 1.7M 247M 1% /run
tmpfs 249M 0 249M 0% /sys/fs/cgroup
tmpfs 249M 0 249M 0% /media
/dev/md127 3.7T 3.3T 400G 90% /DATA
/dev/md127 3.7T 3.3T 400G 90% /home
/dev/md127 3.7T 3.3T 400G 90% /apps
/dev/md127 3.7T 3.3T 400G 90% /run/nfs4/homeIn the Future change The hard drives below, It shows the First sings of falling:D
ST2000DM001-9YN164 S2F06MWT ata_errors 16That link to the logs doesn't work anymore.
Hello
I'm sorry, I have reinstated it
The previous answer that it is full seems a bit strange- surely it would not just stop working at 90% ?
thank you
Andrew
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
