NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 102
Hi all Quiet new here and it may of been asked before sorry about this I have a ReadyNAS 102 two bay with data on it, it seems to be up and running, but since the Windows 11 upgrade I can no longer...
You mean the admin page ? yes that's come's up and the software version is up to date from what it says
Keeps telling me the net work path can not be found
Version 6.10.10
Is your Windows 11 now at 24H2? If so, there are new security "features" that can block SMB access to older NAS's. I ran into this with my old Duo (and my WD EX4). Since my Duo and EX4 are confined to my local network only (no access from Internet), I disabled both SMB signing and Guest Callback.
Easy to reverse if needed or doesn't work.
saudade wrote:
Is your Windows 11 now at 24H2? If so, there are new security "features" that can block SMB access to older NAS's. I ran into this with my old Duo (and my WD EX4).
FWIW, I am running 24H2, and did NOT run into these issues with OS-6.
This issue looks like a name resolution problem, so not the same as the signing problem. I suggest first seeing if access by IP address works before looking at signing.
if I open up the explorer I can see the smegserver which is \\SMEGSERVER I get an error opening it up from the left hand network lower panel on the explorer, but If I use the IP which is //192.168.1.0 it works
but for some funny reason I put in \\SMEGSERVER in the explorer bar this morning and it ask for a login prompt and its now working. !
will give it another shot tonight after work.
running version 6.10.10
Cheers, I will try that tonight
Yes Windows 11 Pro 24H2, was an upgrade over win 10 bypassing the TMP and sign in.
I was able to bring up the IP address in the Explorer OK and it gave me a login prompt, So I guess if I disabled both SMB signing and Guest Callback it should go back to normal ?
thanks for the reply
tommytomato wrote:
I was able to bring up the IP address in the Explorer OK and it gave me a login prompt,
Did you get to the point where you could see the shares?
tommytomato wrote:
So I guess if I disabled both SMB signing and Guest Callback it should go back to normal ?
Likely not. If you can access shares using the IP address, then the problem has nothing to do with signing or callback.
tommytomato wrote:
Keeps telling me the net work path can not be found
I can't tell from your screen capture whether you are doing what I asked or not.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
