NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Readynas 104 stuck on normal boot
My Readynas lost power and now when it boots up it's stuck on boot menu. When I press the backup button to cycle through the options it gets stuck at normal, that is "boot menu normal". I've unplug ...
That sounds like a possible power problem. But quite possibly within the NAS where it converts the 12V from the brick to the internal working voltages, not the external brick. Probably no need to panic, but you should pay close attention for at least a while, especially to any voltage warnings in the logs.
This is the weirdest thing I've ever seen. I woke up two days ago and the unit booted up on its own, I didn't reset or power cycle. It was saying one drive was degraded, I took it out and put it back in. After about 24hrs of data recovery the system is functioning normally. I'm not sure how to explain it. Thank you everyone for the support.
That sounds like a possible power problem. But quite possibly within the NAS where it converts the 12V from the brick to the internal working voltages, not the external brick. Probably no need to panic, but you should pay close attention for at least a while, especially to any voltage warnings in the logs.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
