NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas 204 (3x3TB) drives with new firmware 6.4.2 gives "Remove inactive Volumes"
Did a disk by disk upgrade of a 3x2TB ReadyNas 204. Disk3, Disk2... Before the last disk was upgraded; system was All green, did a firmware upgrade to 6.4.2 I then after reboot swapped out Dr...
Welcome to ReadyNASOS 6.4.2
root@nas:~# apt-get install idle3-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
idle3-tools
0 upgraded, 1 newly installed, 0 to remove and 14 not upgraded.
Need to get 13.4 kB of archives.
After this operation, 56.3 kB of additional disk space will be used.
Get:1 http://mirrors.kernel.org/debian/ wheezy/main idle3-tools armel 0.9.1-1 [13.4 kB]
Fetched 13.4 kB in 0s (79.4 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package idle3-tools.
(Reading database ... 13155 files and directories currently installed.)
Unpacking idle3-tools (from .../idle3-tools_0.9.1-1_armel.deb) ...
root@nas:~# for d in /dev/disk/internal/*; do idle3ctl -g $d; done
Idle3 timer set to 80 (0x50)
Idle3 timer set to 80 (0x50)
Idle3 timer set to 80 (0x50)
root@nas:~#Many thanks!
There is a progress indicator for the resync and you can see when it is finished. Usually the progress indicator will overestimate the time the resync will take at first.
Well it would be recommended to use RED drives rather than Green disks. WD RED disks already have an appropriate setting for WDIDLE3.
Welcome to ReadyNASOS 6.4.2
root@nas:~# apt-get install idle3-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
idle3-tools
0 upgraded, 1 newly installed, 0 to remove and 14 not upgraded.
Need to get 13.4 kB of archives.
After this operation, 56.3 kB of additional disk space will be used.
Get:1 http://mirrors.kernel.org/debian/ wheezy/main idle3-tools armel 0.9.1-1 [13.4 kB]
Fetched 13.4 kB in 0s (79.4 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package idle3-tools.
(Reading database ... 13155 files and directories currently installed.)
Unpacking idle3-tools (from .../idle3-tools_0.9.1-1_armel.deb) ...
root@nas:~# for d in /dev/disk/internal/*; do idle3ctl -g $d; done
Idle3 timer set to 80 (0x50)
Idle3 timer set to 80 (0x50)
Idle3 timer set to 80 (0x50)
root@nas:~#
Many thanks!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
