NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 2100 xraid2 expansion
Hi I have just upgraded our readynas 2100 from 1TB drives to 2TB drives. It has resynced all four drives and is now running fine on the four new 2TB drives. I have rebooted and it has expanded the v...
Kindly try these steps below:
1. Access Frontview, click System tab, click Performance then Enable Journaling.
2. Still under the System tab, click Power then disable Disk Spin-Down.
3. On Frontview, click Volumes tab, click Volume Settings, click Snapshot then delete any active snapshot and turn off snapshot schedule.
4. After doing steps 1-3 above, on Frontview, click System, click Shutdown, select "Shutdown and reboot device" then check the box that says "Check and fix quotas on next boot. This process can take several minutes to more than an hour depending on disk capacity and the number of files on your volume" then click Apply.
After doing the steps above, kindly observe if the volume has expanded successfully.
Hope the steps above would help :D
1. Access Frontview, click System tab, click Performance then Enable Journaling.
2. Still under the System tab, click Power then disable Disk Spin-Down.
3. On Frontview, click Volumes tab, click Volume Settings, click Snapshot then delete any active snapshot and turn off snapshot schedule.
4. After doing steps 1-3 above, on Frontview, click System, click Shutdown, select "Shutdown and reboot device" then check the box that says "Check and fix quotas on next boot. This process can take several minutes to more than an hour depending on disk capacity and the number of files on your volume" then click Apply.
After doing the steps above, kindly observe if the volume has expanded successfully.
Hope the steps above would help :D
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
