NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 214: Shares page won't display "Available" and "Consumed" information
I have 4 ReadyNAS units (varying models) all running OS 6.9.3. They are all setup identically. Oddly, I am unable to see the "Available" and "Consumed" information for this unit. Any suggesti...
That is expected if quotas are disabled on the data volume. An OS Re-install will disable quotas on the data volume and quotas are also disabled by default on volumes created on recent firmware.
If you go to System > Volumes, click on the Settings wheel and go down to Settings you'll see the option to enable quotas.
Note if you have a huge number of snapshots then having quotas enabled may lead to higher memory usage. This is more likely to be an issue on the 100 series which has 512MB RAM than on your RN214 which has 2GB RAM.
That is expected if quotas are disabled on the data volume. An OS Re-install will disable quotas on the data volume and quotas are also disabled by default on volumes created on recent firmware.
If you go to System > Volumes, click on the Settings wheel and go down to Settings you'll see the option to enable quotas.
Note if you have a huge number of snapshots then having quotas enabled may lead to higher memory usage. This is more likely to be an issue on the 100 series which has 512MB RAM than on your RN214 which has 2GB RAM.
Very good! Problem solved - the Quotas box was "unchecked"!
Cheers,
Herb...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
