NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 516 Bios
I sent a note to one of the moderators, but does anyone knwo where I can download the 7/13 Bios for the readynas 516? I need to update mine from the 5/13 1.0 bios to the newer one that supports virtu...
I replied to your PM. The 07/03/2013 BIOS is the earliest that has VT-x enabled but it isn't the latest BIOS.
Updating the BIOS is an advanced process. Furthermore there are some side effects from updating from such an old BIOS as yours that need to be manually addressed. So it's better to consider requests like this on a case by case basis.It's important not to interrupt a BIOS update whilst it's in progress as if you do so you'll brick your device.
mdgm,
thanks for the help. it took like 60 minutes to get it into the right mode. Anyone trying this, pull out your array and use a scratch drive. Shocking if anyone gets it on the first try.
also odd, the instructions state to use a bigger flash drive than 2 GB. I tried a 32 GB and a 16 GB, what finally worked best was an old 1GB or 512MB, it was tiny.
Only some USB keys are compatible. The suggestion to use one >2GB is due to issues encountered on some old BIOS, older than what your unit shipped with.
Now that your BIOS has been updated in future this system will boot off a NETGEAR USB service key connected to the front port automatically (e.g. in the very unlikely event USB Boot Recovery is required). The difficult process of having to do things at the right time to boot off USB isn't needed after the update.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
