NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Duo v2 Flashing Backup LED
Hi, I am having a problem with one of my ReadyNAS Duo v2 units. Firmware version is 5.3.11. I powered down via the Dashboard web interface. When I powered back up about 10minutes later th...
You cannot just put the disks into the 102, they will be wiped.
Your best option if you have another duo v2 is to use that chassis to access the data and copy it to the new 102 when it is set up. Make sure the firmware on the working duo v2 is up to date first.
Dont mix the disks up and label them ( the ones from the broken duo and those in the working duo) according to slot number.
Why the http://www.mydigitalpix.me.uk/ link?
Is the duo still covered by warranty (3 years for the original purchaser). If so, contact support. This sounds like hardware to me.
You might also use RAIDar and see if it gives any more status.
Hi StephenB,
Hardware warranty expired on the 20th April this year.
Raidar cannot see the ReadyNAS
The green LED on the LAN connection is on with occasional blinking.
Are you absolutely certain that when you push the reset button the switch is engaged?
It is certainly an ominous sign if you cannot access the boot menu.
You could perhaps check that the memory is seated properly and try again.
What happens when the unit is booted with no disks, and also with another spare disk that you know is good?
vandermerwe wrote:
What happens when the unit is booted with no disks, and also with another spare disk that you know is good?
I'd try these tests first (at least the no-disk boot).
Sorry for the delay, been away from PC.
The same thing happens with no discs.
I haven't a spare disk that is on compatibily list, but I do have a WD 500GB Green drive (WD5000AAVS).
vandermerwe wrote:You could perhaps check that the memory is seated properly and try again.
How do I get access to do that?
You would need to open the chassis. I don't have a duo and I'm not sure you'll find an instruction manual for this.
I think StephenB is right though and you need to consider how much effort you are prepared to go to.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
