NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS DuoV1 - Post 4.1.12 Upgrade no SSH, Frontview, etc.
I have ready through most of the posts and after seeing that none had all of the problems I have, decided to ask for help. Sunday I decided to upgrade my ReadyNAS Duo V1 from 4.1.10 to 4.1.12. I ha...
Just to update everyone,
I performed a USB recovery of the firmware and the device is now showing on the network and I am able to connect to it. The problem is that I still have blank tabs for the Logs and Health tabs under "Status" in Frontview.
I don't want to rebuild my NAS from the ground up but if this is the only way to restore functionality, I will do so. Hopefully out of the 20 or so people who have viewed this post, someone can offer some advice. I should point out that I know little about Linux and Unix so I have done all that I can at this point...
Here are the screen shots (If this works):
Thank you again for reading...
I performed a USB recovery of the firmware and the device is now showing on the network and I am able to connect to it. The problem is that I still have blank tabs for the Logs and Health tabs under "Status" in Frontview.
I don't want to rebuild my NAS from the ground up but if this is the only way to restore functionality, I will do so. Hopefully out of the 20 or so people who have viewed this post, someone can offer some advice. I should point out that I know little about Linux and Unix so I have done all that I can at this point...
Here are the screen shots (If this works):
Thank you again for reading...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
