NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS error: "mount_block_root+1f1"
I upgraded my RN316-100 NAS last night fom 6.7.1 to 6.7.4.. this evening after booting up the system .. I received..
mount_block_root+1f1
..as the last resting place for my 316.. I have over 15 TB of information and data that has to be recovered.. the NAS willnot respond to anything.. I have tried to reinstall the OS I have tried to boot it from USB.. the system will not boot.. I must access my data and this has to be fixed as soon as possible...
Does anyone know what happened that NETGEAR messed up the firmware for these machines?
Does anyone know of anyway to repair the system...
Help in this matter would be greatly appreciated..
Thanks for the PM.. the actual problem here was the USB Flash Drive I tried to use at first.. ( PNY 64GB )
...for those who do not know the method being used is the USB Recovery Tool on x86 RN316-100NAS..
I picked up a small 16 GB flash drive for about $10 at WalMart.. ( onn USB 2.0 Flash Drive 16GB )
Brought that home and tried with the files. This did not allow mine to boot into the recovery but gave a DEBUG: 56618 message on the LCD.. - which indicated failure of the Boot recovery process..
after the second format and using the regular files and the 6.7.4 firmware the system successfully recovered twice ( second time was because I did not know to remove the USB...) Gave a relatively short Booting..' message then shut off..
Everything seems to be intact... First boot gave the typical ( Err: no disk detected... ) because I did all of this with my drives out of the system so nothing got changed if there was even a possibility...
Solved...
3 Replies
Replies have been turned off for this discussion
Hi MarkusX0 I've sent you a PM.
Thanks for the PM.. the actual problem here was the USB Flash Drive I tried to use at first.. ( PNY 64GB )
...for those who do not know the method being used is the USB Recovery Tool on x86 RN316-100NAS..
I picked up a small 16 GB flash drive for about $10 at WalMart.. ( onn USB 2.0 Flash Drive 16GB )
Brought that home and tried with the files. This did not allow mine to boot into the recovery but gave a DEBUG: 56618 message on the LCD.. - which indicated failure of the Boot recovery process..
after the second format and using the regular files and the 6.7.4 firmware the system successfully recovered twice ( second time was because I did not know to remove the USB...) Gave a relatively short Booting..' message then shut off..
Everything seems to be intact... First boot gave the typical ( Err: no disk detected... ) because I did all of this with my drives out of the system so nothing got changed if there was even a possibility...
Solved...
Is there any off site place to download the files needed for a restore. My download seems slower than I'd like. I'm hoping its just a few of us trying to fix this issue on our Nas'es
I'm having this issue on a readynas rn314
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
