NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas NV Pre Netgear No Boot
This device has worked fine for years.
This morning I realized it wouldn't let me access the drives.
I hard power cycled the device.
The device appears to boot but the blue LED pulses (not fast blink) continually.
I know a good bit about Linux and recalled that I had SSH enabled.
It lets me SSH in.
Here's some log files.
Last few lines of frontview/error.log
Here's raidlog from 2 days ago
partitions
Someone -please- help me with this, our business data is on this device and we don't know what to do!!!!
Thanks,
Matt
This morning I realized it wouldn't let me access the drives.
I hard power cycled the device.
The device appears to boot but the blue LED pulses (not fast blink) continually.
I know a good bit about Linux and recalled that I had SSH enabled.
It lets me SSH in.
Here's some log files.
NAS:/dev/c# cat /etc/fstab
#-----------------------------------------------------------------------------
# <device> <mount> <type> <options> <freq> <pass>
#-----------------------------------------------------------------------------
/dev/md0 / ext2 defaults,noatime 0 0
proc /proc proc defaults 0 0
/dev/md1 swap swap defaults 0 0
/dev/c/c /c ext2 defaults,acl,user_xattr,usrquota,grpquota,noatime 0 2
/AVContent /home/ftp/AVContent bind bind 0 0
/Apps /home/ftp/Apps bind bind 0 0
/Backups /home/ftp/Backups bind bind 0 0
/Data /home/ftp/Data bind bind 0 0
/ECAN /home/ftp/ECAN bind bind 0 0
/PC-Games /home/ftp/PC-Games bind bind 0 0
NAS:/dev/c# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md0 1.9G 798M 1.1G 41% /
tmpfs 16k 0 16k 0% /USB
NAS:/dev/c# mount -a
mount: /dev/c/c already mounted or /c busy
mount: special device /AVContent does not exist
mount: special device /Apps does not exist
mount: special device /Backups does not exist
mount: special device /Data does not exist
mount: special device /ECAN does not exist
mount: special device /PC-Games does not exist
NAS:/var/log# cat dmesg
Linux version 2.6.17.14ReadyNAS (root@calzone) (gcc version 3.3.5 (Infrant 3.3.5-1)) #1 Wed Jun 20 20:08:20 PDT 2012
You system is PZERO.
ASIC=IT3107
On node 0 totalpages: 16384
Normal zone: 15360 pages, LIFO batch:3
DMA zone: 1024 pages, LIFO batch:0
zlist 0 802f115c
zone 802f0f14, name Normal
zlist 1 802f1170
zone 802f0ccc, name DMA
zlist 2 802f1184
zone 802f0f14, name Normal
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc rw raid=noautodetect profile=2
kernel profiling enabled (shift: 2)
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 32768 (order: 3, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 2, 65536 bytes)
Memory: 226176k/262144k available (2592k kernel code, 35888k reserved, 656k data, 96k init, 0k highmem)
init_mm.pgd 8f0ff000
Calibrating delay loop... 186.36 BogoMIPS (lpj=931840)
Mount-cache hash table entries: 2048
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 16384k freed
NET: Registered protocol family 16
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: -1, 8192 bytes)
TCP established hash table entries: 8192 (order: 1, 32768 bytes)
TCP bind hash table entries: 4096 (order: 0, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1070280003.200:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 4096 (order 0, 16384 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
xor engine => SPARC.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Serial: Padre driver $Revision: 1.1.1.1 $ 2 ports
ttyS0 at I/O 0x0 (irq = 7) is a padre uart
ttyS1 at I/O 0x0 (irq = 8) is a padre uart
oprofile: using timer interrupt.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
md: Skipping autodetection of RAID arrays. (raid=noautodetect)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 96k freed
padre_i2c: module license 'Infrant Technologies, Inc.' taints kernel.
padre_i2c: no version for "udiv" found: kernel tainted.
TWSI Initialize
Padre NSPIO setup: 80353394... No argv, go to default.
raid5: xor select to PADRE_RXA.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
padre chip scan,token=1
Scan the padre NSP IO hardware.
Need memory for RTEngine 63680
PIO mode on chan 7
DMA mode on chan 0
DMA mode on chan 1
DMA mode on chan 2
DMA mode on chan 3
Padre IDE controller, sata start:1
++++++++++++++++++++++++ reset TLER ++++++++++++++++++++++
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=SET: 0x300 0x100 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=SET: 0x300 0x100 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
hdc: WDC WD3202ABYS-02B7A0 (s/n:WD-WCAT1H561723), ATA DISK drive (ATAEXT)
++++++++++++++++++++++++ reset TLER ++++++++++++++++++++++
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=SET: 0x300 0x100 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=SET: 0x300 0x100 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
hde: WDC WD5002ABYS-01B1B0 (s/n:WD-WCASY3716462), ATA DISK drive (ATAEXT)
++++++++++++++++++++++++ reset TLER ++++++++++++++++++++++
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=SET: 0x300 0x100 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=SET: 0x300 0x100 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
hdg: WDC WD3200SD-01KNB0 (s/n:WD-WCAMR2672029), ATA DISK drive (ATAEXT)
++++++++++++++++++++++++ reset TLER ++++++++++++++++++++++
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x46 (70)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=SET: 0x300 0x100 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=SET: 0x300 0x100 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=R FUNC=READ: 0x300 0x200 0x100 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
SMART LOG issue cmd MODE=WRITE_LOG, TIMER=W FUNC=READ: 0x300 0x200 0x200 0x0
TLER Current setting = 0x0 (0)
After TLER: status = 0x50, error=0xd600
hdi: WDC WD5002ABYS-02B1B0 (s/n:WD-WCASYE863935), ATA DISK drive (ATAEXT)
ide1 at 0x200-0x207,0x208 on irq 32
ide2 at 0x280-0x287,0x288 on irq 33
ide3 at 0x300-0x307,0x308 on irq 34
ide4 at 0x380-0x387,0x388 on irq 35
Update NSPIO settings 80353394.
hdc: max request size: 512KiB
hdc: use capacity 625142448 sectors (320072 MB)
Drive support hpa, still should not change max addr.
hdc: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3
hde: max request size: 512KiB
hde: use capacity 976773168 sectors (500107 MB)
Drive support hpa, still should not change max addr.
hde: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63
hde: cache flushes supported
hde: hde1 hde2 hde3
hdg: max request size: 512KiB
hdg: use capacity 625142448 sectors (320072 MB)
Drive support hpa, still should not change max addr.
hdg: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63
hdg: cache flushes supported
hdg: hdg1 hdg2 hdg3
hdi: max request size: 512KiB
hdi: use capacity 976773168 sectors (500107 MB)
Drive support hpa, still should not change max addr.
hdi: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63
hdi: cache flushes supported
hdi: hdi1 hdi2 hdi3
Link to padre IO.
RAID disks check:
ALL = 22/33/34/56/0/0/0/0, 4
IDE = 22/33/34/56/0/0/0/0, 4
MD = 22/33/34/56/0/0/0/0, 4
RAID rule check result: 0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
Disk protected mark = 1
Find PHY: 0
Lookup PHY ID: 0x000f, 0x01
P0 GPIO initialization... BOARDID=1
Boot type/reason: normal/0/0
Found LM75 at 0x48
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Samsung NAND flash rev C
size of table 4096
table is there 0x8
total bad block 0
Total bad block number 0
retlen = 0x0200
VPD checksum = 0xc21b
ECC is ON
Creating 2 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00100000 : "P0 flash partition 1"
0x00100000-0x04000000 : "P0 flash partition 2"
NEON flash: probing 8-bit flash bus
CFI: Found no NEON flash device at location zero
NEON flash: unknown flash device, mfr id 0x1, dev id 0x0
NEON flash: Found no Atmel device at location zero
This board is not supported.
You can use parm_extport=X module parm.
I2C device 1f doesn't exist
I2C device 1b doesn't exist
LCD device not found
md: Autodetecting RAID arrays.
Update time on 0 :1352952759, raid 1
Update time on 1 :1348785820, raid 5
Update time on 2 :1352944604, raid 5
Update time on 3 :1352952759, raid 1
Update time on 4 :1348785820, raid 5
Update time on 5 :1352944604, raid 5
Update time on 6 :1352952759, raid 1
Update time on 7 :1348785820, raid 5
Update time on 8 :1352944604, raid 5
Update time on 9 :1352952759, raid 1
Update time on 10 :1348785820, raid 5
Update time on 11 :1352944604, raid 5
After sort
Update time on 0 :1352944604, raid 5
Update time on 1 :1352944604, raid 5
Update time on 2 :1352944604, raid 5
Update time on 3 :1352944604, raid 5
Update time on 4 :1348785820, raid 5
Update time on 5 :1348785820, raid 5
Update time on 6 :1348785820, raid 5
Update time on 7 :1348785820, raid 5
Update time on 8 :1352952759, raid 1
Update time on 9 :1352952759, raid 1
Update time on 10 :1352952759, raid 1
Update time on 11 :1352952759, raid 1
md: autorun ...
md: considering hdc1 ...
md: adding hdc1 ...
md: adding hdg1 ...
md: adding hdi1 ...
md: adding hde1 ...
md: hdi2 has different UUID to hdc1
md: hdg2 has different UUID to hdc1
md: hde2 has different UUID to hdc1
md: hdc2 has different UUID to hdc1
md: hdi3 has different UUID to hdc1
md: hde3 has different UUID to hdc1
md: hdg3 has different UUID to hdc1
md: hdc3 has different UUID to hdc1
md: created md0
md: bind<hde1>
md: bind<hdi1>
md: bind<hdg1>
md: bind<hdc1>
md: running: <hdc1><hdg1><hdi1><hde1>
raid1: raid set md0 active with 4 out of 4 mirrors
md: considering hdi2 ...
md: adding hdi2 ...
md: adding hdg2 ...
md: adding hde2 ...
md: adding hdc2 ...
md: hdi3 has different UUID to hdi2
md: hde3 has different UUID to hdi2
md: hdg3 has different UUID to hdi2
md: hdc3 has different UUID to hdi2
md: created md1
md: bind<hdc2>
md: bind<hde2>
md: bind<hdg2>
md: bind<hdi2>
md: running: <hdi2><hdg2><hde2><hdc2>
raid5: device hdi2 operational as raid disk 3
raid5: device hdg2 operational as raid disk 2
raid5: device hde2 operational as raid disk 1
raid5: device hdc2 operational as raid disk 0
raid5: allocated 16500kB for md1
raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 0
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, o:1, dev:hdc2
disk 1, o:1, dev:hde2
disk 2, o:1, dev:hdg2
disk 3, o:1, dev:hdi2
Re-start RTE.
drive=hdc,bdev=hdc2,d_start=0,p_start=4096032
drive=hde,bdev=hde2,d_start=0,p_start=4096001
Found unmapped drive position: 4096032/4096001, 0/0, stop RTEngine.
md: considering hdi3 ...
md: adding hdi3 ...
md: adding hde3 ...
md: adding hdg3 ...
md: adding hdc3 ...
md: created md2
md: bind<hdc3>
md: bind<hdg3>
md: bind<hde3>
md: bind<hdi3>
md: running: <hdi3><hde3><hdg3><hdc3>
raid5: device hdi3 operational as raid disk 3
raid5: device hde3 operational as raid disk 1
raid5: device hdg3 operational as raid disk 2
raid5: device hdc3 operational as raid disk 0
raid5: allocated 16500kB for md2
raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 0
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, o:1, dev:hdc3
disk 1, o:1, dev:hde3
disk 2, o:1, dev:hdg3
disk 3, o:1, dev:hdi3
Re-start RTE.
Too many devices, stop RTEngine.
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 128986
EXT3-fs: md0: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
linked, 1000mbps mode
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hde: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdg: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdi: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdi: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hde: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdg: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdi: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdi: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hde: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdg: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdi: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdi: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hde: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdg: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hdi: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdi: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with journal data mode.
RTE dead, go generic path
RTE off, go generic path
RTE is in sleep state
Adding 1572640k swap on /dev/md1. Priority:0 extents:1 across:1572640k
enable_irq(11) unbalanced from f804059c
hdc: cache flushes supported
hde: cache flushes supported
hdg: cache flushes supported
hdi: cache flushes supported
EXT2-fs warning (device dm-0): ext2_fill_super: mounting ext3 filesystem as ext2
Last few lines of frontview/error.log
[Thu Oct 25 17:49:14 2012] [notice] caught SIGTERM, shutting down
[Thu Oct 25 17:49:30 2012] [warn] RSA server certificate CommonName (CN) `192.168.1.30' does NOT match server name!?
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/get_handler.pm line 2.
[Thu Oct 25 17:49:49 2012] [warn] RSA server certificate CommonName (CN) `192.168.1.30' does NOT match server name!?
[Thu Oct 25 17:49:49 2012] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/0.9.8e DAV/2 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.8 configured -- resuming normal operations
[Thu Nov 15 14:49:05 2012] [warn] RSA server certificate CommonName (CN) `192.168.1.30' does NOT match server name!?
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
[Thu Nov 15 14:49:41 2012] [warn] RSA server certificate CommonName (CN) `192.168.1.30' does NOT match server name!?
[Thu Nov 15 14:49:41 2012] [warn] pid file /var/log/frontview/apache-ssl.pid overwritten -- Unclean shutdown of previous Apache run?
[Thu Nov 15 14:49:41 2012] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/0.9.8e DAV/2 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.8 configured -- resuming normal operations
Here's raidlog from 2 days ago
NAS:/var/log/frontview# cat raid_config_2012_11_18.log
***** RAID configuration log from 2012/11/18 *****
Device : /dev/md0
Create Time : 1150205807
Update Time : 1353239220
RAID Level : 1
RAID Capacity : 2047936
Disk Size : 2047936
Chunk Size : 0
Disks : 4
RAID Disks : 4
Active Disks : 4
Working Disks : 4
Failed Disks : 0
Spare Disks : 0
State : 1 [ Clean ]
Disk Device RAID Disk Maj/Min Sectors State
---------------------------------------------------------------------------
0 /dev/hdc1 0 22/ 1 4096000 6 [ Active Sync ]
1 /dev/hde1 1 33/ 1 4096000 6 [ Active Sync ]
2 /dev/hdg1 2 34/ 1 4096000 6 [ Active Sync ]
3 /dev/hdi1 3 56/ 1 4096000 6 [ Active Sync ]
Device : /dev/md1
Create Time : 1199068375
Update Time : 1353008732
RAID Level : 5
RAID Capacity : 1572672
Disk Size : 524224
Chunk Size : 16384
Disks : 4
RAID Disks : 4
Active Disks : 4
Working Disks : 4
Failed Disks : 0
Spare Disks : 0
State : 1 [ Clean ]
Disk Device RAID Disk Maj/Min Sectors State
---------------------------------------------------------------------------
0 /dev/hdc2 0 22/ 2 1048576 6 [ Active Sync ]
1 /dev/hde2 1 33/ 2 1048576 6 [ Active Sync ]
2 /dev/hdg2 2 34/ 2 1048576 6 [ Active Sync ]
3 /dev/hdi2 3 56/ 2 1048576 6 [ Active Sync ]
Device : /dev/md2
Create Time : 1150205807
Update Time : 1353238022
RAID Level : 5
RAID Capacity : 929971968
Disk Size : 309990656
Chunk Size : 16384
Disks : 4
RAID Disks : 4
Active Disks : 4
Working Disks : 4
Failed Disks : 0
Spare Disks : 0
State : 1 [ Clean ]
Disk Device RAID Disk Maj/Min Sectors State
---------------------------------------------------------------------------
0 /dev/hdc3 0 22/ 3 619981486 6 [ Active Sync ]
1 /dev/hde3 1 33/ 3 619981486 6 [ Active Sync ]
2 /dev/hdg3 2 34/ 3 619981486 6 [ Active Sync ]
3 /dev/hdi3 3 56/ 3 619981486 6 [ Active Sync ]
partitions
disk_smart_2012_10_14.log ecounter_2012_10_01_0942.log partitions_2012_09_23.log raid_config_2012_09_16.log raid_config_2012_11_18.log status.log-old
NAS:/var/log/frontview# cat partitions_2012_11_18.log
***** Disk partition log from 2012/11/18 *****
# partition table of /dev/hdc
unit: sectors
/dev/hdc1 : start= 32, size= 4096000, Id=fd
/dev/hdc2 : start= 4096032, size= 1048576, Id=fd
/dev/hdc3 : start= 5144608, size=619981486, Id=fd
/dev/hdc4 : start= 0, size= 0, Id= 0
# partition table of /dev/hde
unit: sectors
/dev/hde1 : start= 1, size= 4096000, Id=fd
/dev/hde2 : start= 4096001, size= 1048576, Id=fd
/dev/hde3 : start= 5144577, size=619981486, Id=fd
/dev/hde4 : start= 0, size= 0, Id= 0
# partition table of /dev/hdg
unit: sectors
/dev/hdg1 : start= 1, size= 4096000, Id=fd
/dev/hdg2 : start= 4096001, size= 1048576, Id=fd
/dev/hdg3 : start= 5144577, size=619981486, Id=fd
/dev/hdg4 : start= 0, size= 0, Id= 0
# partition table of /dev/hdi
unit: sectors
/dev/hdi1 : start= 32, size= 4096000, Id=fd
/dev/hdi2 : start= 4096032, size= 1048576, Id=fd
/dev/hdi3 : start= 5144608, size=619981486, Id=fd
/dev/hdi4 : start= 0, size= 0, Id= 0
Someone -please- help me with this, our business data is on this device and we don't know what to do!!!!
Thanks,
Matt
12 Replies
Replies have been turned off for this discussion
- Here is disk smart
NAS:/var/log/frontview# cat disk_smart_2012_11_18.log
***** Disk SMART log from 2012/11/18 *****
***** Disk SMART log for channel 1 [hdc] *****
smartctl 5.42 2011-10-20 r3458 [padre-linux-2.6.17.14ReadyNAS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA
Device Model: WDC WD3202ABYS-02B7A0
Serial Number: WD-WCAT1H561723
LU WWN Device Id: 5 0014ee 1ae2fbb6b
Firmware Version: 02.03B03
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Nov 18 06:47:02 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 73) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 201 195 021 Pre-fail Always - 950
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15826
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 18
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2
194 Temperature_Celsius 0x0022 104 100 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
***** Disk SMART log for channel 2 [hde] *****
smartctl 5.42 2011-10-20 r3458 [padre-linux-2.6.17.14ReadyNAS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA
Device Model: WDC WD5002ABYS-01B1B0
Serial Number: WD-WCASY3716462
LU WWN Device Id: 5 0014ee 2026ed55f
Firmware Version: 02.03B02
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Nov 18 06:47:08 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 239 238 021 Pre-fail Always - 1016
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 25
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 32867
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 23
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 22
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 25
194 Temperature_Celsius 0x0022 100 088 000 Old_age Always - 47
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
***** Disk SMART log for channel 3 [hdg] *****
smartctl 5.42 2011-10-20 r3458 [padre-linux-2.6.17.14ReadyNAS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE Serial ATA
Device Model: WDC WD3200SD-01KNB0
Serial Number: WD-WCAMR2672029
Firmware Version: 08.05J08
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Nov 18 06:47:13 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 116) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x001f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 5583
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 76
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 024 024 000 Old_age Always - 56052
10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 76
194 Temperature_Celsius 0x0022 110 100 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
***** Disk SMART log for channel 4 [hdi] *****
smartctl 5.42 2011-10-20 r3458 [padre-linux-2.6.17.14ReadyNAS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA
Device Model: WDC WD5002ABYS-02B1B0
Serial Number: WD-WCASYE863935
LU WWN Device Id: 5 0014ee 25a56c619
Firmware Version: 02.03B03
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Nov 18 06:47:19 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 239 237 021 Pre-fail Always - 1016
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 23
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 17404
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 20
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2
194 Temperature_Celsius 0x0022 104 101 000 Old_age Always - 43
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Thanks,
Matt - Top is showing fsck.ext2 running, but we let it run several hours earlier and the light finally turned solid blue but nothing worked.
Will update thread in the morning whether or not things are working.
If anything happens to jump out at anyone from those logs please let me know.
The hard lock/non responsiveness the system initially experienced naturally has us concerned.
Thanks,
Matt - OK so update, the fsck finished running,
But the blue power/led is still flashing.
I can't SSH either
Every 2.5 seconds there will be a brief 'pause' in the pulsing of the power led and the ACT led will flash.
All 4 disk LEDs are still green.
Please advise.
Thanks,
Matt - I'm assuming from what you wrote above that you don't have an up to date backup?
Could you power down the NAS, remove the disks, connect them to an internal SATA port in your PC and check them using WD LifeGuard Diagnostics? - hey mdgm, the point of raid is kind of to not need to backup, but yes we do have a recent backup.
the smart data is 100% clean on the disk, not a single write error on any of them.
and the fact that the fsck sees the folume and runs against it shows that the volume itself seems to be ok.
its like the nas is just freezing up or something :(
does anyone see anything specific in the logs above? or require additional logs? MWestfall wrote: hey mdgm, the point of raid is kind of to not need to backup
The point of RAID is to provide redundancy/high-availability. If a single disk fails, data remains intact. This doesn't negate the need for a backup at all as there are a number of problems that RAID can't protect you against. See Preventing Catastrophic Data LossMWestfall wrote:
but yes we do have a recent backup.
Good.MWestfall wrote:
the smart data is 100% clean on the disk, not a single write error on any of them.
So? Testing the disks using WD LifeGuard diagnostics is more thorough. You could still have a bad disk.
You may also wish to run the memory test: http://www.readynas.com/kb/faq/hardware/is_there_a_way_i_can_verify_if_my_memory_is_good- Yes but if it was -A- bad disk it would still boot and work and I could drop in a new disk :-/
- I have a server here that supports RAID 5, but I know that different RAID controllers have different "raid headers" and if I plug them into it it could corrupt the data alltogether. Does that sound right or are RAID headers standardized for the purposes of data recovery events such as these?
Also, we do the backup weekly, and the device -quit- in the middle of the backup on sunday, so We've lost a weeks worth of work if I can't recover the volume or get the NAS back online :( - I would try an OS Reinstall at this point. This will leave the data intact and reset the admin password and network settings.
Follow the instructions in the guide
http://www.readynas.com/download/docume ... 0Nov11.pdf - That manual is not for my hardware, I do not have an NV+ or a Duo.
I have an Infrant ReadyNas NV.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
