NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS NV+ stuck "Booting..."
Yesterday my ReadyNAS powered itself off. After a power up I see with Raidar that it completes the file system check, but then never becomes operational. It disappears from Raidar and the LCD display...
The system wouldn't boot due to a failed attempt to download the logs (there were some very large log files). The problem is now fixed.
You might have a bad disk.
You could power off the NAS, remove your disks (label order) and hook them up to your PC and test them using vendor tools e.g. use SeaTools to test SeaGate disks.
Thanks for that. Do you happen to know if the disk test on the boot menu will indicate if I have a failing disk ?
The disk test boot menu option is not available on the v1. It is available on the v2.
Looking at your profile you have a v1: http://www.rnasguide.com/2012/01/09/how-to-tell-whether-i-have-a-duo-v1-or-duo-v2-or-nv-v1-or-nv-v2/OK, thanks. I'll check the menu when I get home anyway.
Yes you were correct, there was no disk test option. I did run the memory test which passed. I've now removed the hard drive and used the WD diagnostic from a PC. So far I've run the Quick Test on all 4 drives and none showed errors. I'm now starting to run the extended test to check them more thoroughly. If these pass, I guess I'm looking at either firmware or hardware issues. I would appreciate some advice here ?
Is the OS reinstall mentioned in the boot menu non-destructive in terms of my drive data ? If not should is the only course now to replace the NV+ ? On that score what is the obvious replacement for that which will take my 4 drives and just work.
Thanks again.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
