NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Pro 6 general protection fault: 0000 [#2] SMP
Issues: ReadyNAS keep freeze when trying access the local IP it doesn't show the login so i have to manual hold the button to reset it What is use for: Storage Data for IP Cameras Raid 6 6x3TB ...
Here is the sys.log
The Reolink errors are flooding the log.
I am seeing this
Mar 07 07:22:34 NASV2842021 mdadm[2943]: RebuildStarted event detected on md device /dev/md0, component device resync
Mar 07 07:22:34 NASV2842021 mdadm[2943]: NewArray event detected on md device /dev/md1
Mar 07 07:22:34 NASV2842021 mdadm[2943]: NewArray event detected on md device /dev/md127
But nothing after that on either md127 (your data volume) or md0 and md1.
What are you seeing on the volumes and shares pages of the NAS web ui?
The Reolink is flooding the log i think cause i setup a FTP for my 5 POE Camera to send the picture and video in the NAS for storage cause the inbuilt MircoSD card only 128GB and it doesn't hold a month of video only a week.
will that crash/freeze the NAS?
it is sending data to the NAS when motions detect and it will write data
ninjasniper85_ wrote:
The Reolink is flooding the log i think cause i setup a FTP for my 5 POE Camera to send the picture and video in the NAS for storage cause the inbuilt MircoSD card only 128GB and it doesn't hold a month of video only a week.
will that crash/freeze the NAS?
It shouldn't (famous last words).
The transfers are failing at the moment though, and creating a lot of clutter in the logs.
ok understand do i have to decrease the write for my IP Camera > NAS?
also
kernel.log
i have access to the folder atm but it stop sending video and frozen up around 4pm
System log in PDF form
i can access the admin page and nas but nothing sending to the nas no error when i am on raidar when i check diagnostics
like you said the transfer are failing
how do i fix it decrease the Max file size (MB) on my camera
2 camera is set for 1024MB
2 camera is set for 100MB
1 camera is set for 50MB
they are all set for Motion Detection
i do have a setting call Transport Mode
honesty it could be this that causing the log to error and the nas to freeze up
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
