NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Pro 6 stuck at "ReadyNAS" logo on display
I was recently copying all of the data off of my ReadyNAS Pro 6, and the device disappeared from my network.
I've tried rebooting the device, but it is stuck displaying the "ReadyNAS" logo on the panel, and no further activity. There are no activity lights on the Ethernet port. The device does not show up my Network devices on either a Mac or Windows PC, and is not found using the RAIDar utility. (I have three other ReadyNAS devices on my network, and those are displaying properly).
I tried powering down, removing all six disks, and powering back on—same problem.
I also tried holding down the Reset pin on the back of the device while powering up, hoping to get the Boot menu, but the Boot menu never appears—still stuck on the ReadyNAS logo.
One of the system fans is not sounding great, so I assume it's time to change that out if it's user-replaceable, but right now my unit seems bricked.
What else can I try?
4 Replies
Replies have been turned off for this discussion
- Could it be a failed power supply even if the front panel is still displaying the ReadyNAS logo, and the system fans power up and are spinning?
thinksinc wrote:
Could it be a failed power supply even if the front panel is still displaying the ReadyNAS logo, and the system fans power up and are spinning?The front panel only needs 5 volts to work, and it is common for it to work even if the 12 volt power from the PSU has failed.
But the fan does require 12 volts, so if it is powered then a PSU issue is much less likely.
It could maybe be memory - Sandshark might have some other ideas.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
