NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Pro 6 Stuck on "ReadyNAS" Logo
I'm having the same exact issue described her but did not see a reply option: https://community.netgear.com/t5/Using-your-ReadyNAS-in-Business/Pro-6-6-6-0-beta-2-T117-turning-on-but-stuck-at-booting...
I figured out the issue. Whoever previously owned it had a cable from the front panel pluged into the wrong pins on the motherboard. Problem solved.
Unfortunately I did connect the 4 pin cpu power connector. I also tried a regular atx PSU. The memory seems to be two 1GB sticks. I've ordered a vga header to get some more info.
My quick research showed them to be 2GB. But my main concern was that they are not 4Gb "high density" ones, which do not work, and they are not. The memory from your Ultra6 should also work.
The VGA header is your best approach to finding what's wrong. But if the unit will not complete POST (which is high on the list of problems causing this symptom), figuring out why is just trial and error.
- Unfortunately no luck. Got my vga header cable today and nothing displays. Mobo must be dead.
Well, that's a shame. Before you give up, check the power supply and memory connections. Since the memory was removed, maybe you should even check that there is a processor.
Good point. I haven't removed the cpu cooler. thanks!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
