NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Remove inactive volumes to use the disk. Disk #1, 2, 4.
Hello! Recently we had a drive fail in our ReadyNAS 314. This drive was #3. We replaced the drive, but did not see any messages in the logs about it rebuilding the array. Looking through the logs, th...
Hello Netcomm,
Do you have full back up of the files?
What do you see under Volumes of the admin page?
Regards,
Hello Jenn!
This drive specifically is used to do our backups with, but we do not have a backup drive of this drive. Under Volumes, it shows
Hello Netcomm,
Are all the disks identical? I mean same model number.
If you have replaced the disk 3, since that is RAID 5, you should still be able to access the file with the disk 3 out, can you try please?
Regards,
Thank you for the response Jenn!
All of the disks are the same model number. I went ahead and shutdown the ReadyNAS, then removed the replacement drive (#3). After booting back up, the screen is the same, but with a missing drive.
Hi Netcomm,
What firmware version are you on?
Can you send the log data to us? Sending Logs
Thanks,
AlexPe
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
